In this project, which uses the Arduino IDE, we create and demonstrate a digital drawing pad using an ESP32-based e-paper display dev board, rotary encoders for drawing control, and an accelerometer for shake detection to initiate an erase.
23 hours ago by Kristijan Nelkovski
Learn how to design the battery array that best fits your system’s power requirements. This article will help you interpret battery specifications, estimate operating life, and understand the relationship between capacity, load, and environment.
March 20, 2024 by Jerry Twomey
In this project, we’ll use a Raspberry Pi Pico to build an adjustable clock with an LED display. We’ll then integrate the clock with a Radio Shack Science Fair Microcomputer Trainer programmed to function as a 7-bit binary counter.
February 11, 2024 by Don Wilcher
As part of a vector network analyzer (VNA), a directional coupler enables us to characterize a device’s performance by its S-parameters. Read this article to learn more about this important piece of equipment.
January 19, 2024 by Dr. Steve Arar
The output power and efficiency of a power amplifier (PA) are highly dependent on its load terminations. Learn how to characterize a PA's performance by analyzing load lines and estimating the load-pull contours of constant output power.
January 05, 2024 by Dr. Steve Arar