EV Kit Giveaway: Get 2x Higher Bandwidth for Faster Self-Driving Cars

In partnership with Maxim Integrated

Giveaway Overview

Designing LiDAR applications? To deliver 10mph faster autonomous driving at highway speeds, you’ll need the MAX40026 high-speed comparator plus the MAX40660 high-bandwidth transimpedance amplifier. Together, these LiDAR ICs deliver more than 2x higher bandwidth while accommodating 32 additional channels within the same LiDAR module size versus the closest competitive solution.

Register below to enter our partnered giveaway with Maxim to win either a MAX40026 or MAX40660 evaluation kit, so you can experience the ICs for yourself.

The MAX40026 evaluation kit is a fully assembled electrical demonstration kit designed to evaluate the MAX40026, an ultra-low 280ps propagation delay and ultra-low dispersion comparator with 2mV hysteresis. This EV kit demonstrates the MAX40026ATA/VY+ in an 8-pin TDFN package.

MAX40026EVKIT Key Features

  • Fast Propagation Delay: 280ps typ
  • Low Overdrive Dispersion: 25ps (VOV = 10mV to 100mV)
  • Supply Voltage 2.7V to 3.6V
  • 39.4mW at 2.7V Supply
  • Power-Efficient LVDS Outputs
  • -40°C to +125°C Temperature Range

The MAX40660 evaluation kit is a fully assembled kit designed to evaluate the MAX40660 trans-impedance amplifier. It provides an electrical interface to the IC that is similar, but not the same as a photodiode. The MAX40660 EV kit PCB comes with a MAX40660ATB/ VY+ installed.

MAX40660EVKIT Key Features

  • Easy Electrical Evaluation of the MAX40660
  • EV Kit Designed for 50Ω Interfaces
  • -40°C to +125°C Temperature Range
  • Tested 10-TDFN-EP MAX40660ATB/VY+ Device
  • Accommodates Easy-to-Use Components
  • Proven PCB Layout
  • Fully Assembled and Tested

Sign Up Below

2 Comments