All About Circuits

Prizes

i.MX RT1170 Evaluation Kit

Deadlines

Giveaway has ended to win 1 i.MX RT1170 Evaluation Kit.

SHARE

NXP Giveaway: i.MX RT1170 Evaluation Kit

In partnership with NXP

Giveaway Overview

All About Circuits in collaboration with NXP will be giving away an NXP i.MX RT1170 Evaluation Kit. Register below for a chance to win. NXP’s i.MX RT1170 Evaluation Kit provides a high-performance solution in a highly integrated board. It consists of a 6-layer PCB with a through-hole design for better EMC performance at a low cost, and it includes key components and interfaces.

Key Features/Specifications

  • Processor

    • MIMXRT1176DVMAA

    • 1 GHz Arm Cortex-M7 core

    • 400 MHz Arm Cortex-M4 core

  • Board Memory

    • 512 Mbit SDRAM memory

    • 512 Mbit Octal Flash

    • 128 Mbit QSPI Flash

    • 2 Gbit Raw NAND Flash

    • 64 Mbit LPSPI Flash

    • TF socket for SD card

  • Connectivity

    • 2x Micro-USB OTG connectors

    • Ethernet (10/100/1000M) connector

    • Ethernet (10/100M) connector

    • M.2 connector

    • CAN transceivers

    • ARDUINO® interface - Expansion connectors need to be added

    • FRDM motor control interface

    • SIM card slot

  • Audio

    • Audio codec

    • 4-Pole audio headphone jack

    • External speaker connection

    • Microphone (analog and digital)

    • SPDIF Connector

  • Debug Capabilities

    • JTAG connector

    • On-board DAP-Link debugger

  • Sensors

    • 6-Axis ecompass (3-Axis Mag, 3-Axis Accel) sensor FXOS8700CQ

  • Expansion Connectors

    • MIPI® LCD connector

    • MIPI camera sensor connector

  • Additional

    • MCUXpresso Software and Tools, including MCUXpresso SDK with Amazon FreeRTOS™

    • IAR Embedded Workbench® IDE

    • Keil® IDE

    • All-in-one board design

    • 6-Layer through hole PCB

Giveaway already ended 1090 days ago.
Ideas
9 Comments
Log in to comment
  • M
    mailvibi March 30, 2021

    Mini terminal to detect CAN bus errors based on pre-defined rules. if error is detected raise alarm.

    Like. Reply
  • ahmadradhy April 07, 2021

    We try to implement the Internet of Things (IoT) technology that is capable of monitoring every day on the desired chili plant. The duration of monitoring can be set in such a way as well as the data from monitoring results are also directly connected and actually recorded on a laptop / pc. So we hope this IoT technology can update chili farmers’ information about the condition of their chili plants, and be able to provide early warning to farmers to immediately prevent the growth and development of pests and diseases.
    this project explains how to analyze data from the soil moisture levels. there is 2 sensor to measure soil parameter (soil humidity and soil temperature).

    Like. Reply
  • L
    lesaf61 April 10, 2021

    Looking forward to work with this board

    Like. Reply
Load more comments