Latest Industry Articles

Categories

Considerations for Including a Board Mount Pressure Sensor

In this article, find out what board mount pressure sensors are, how they work, their benefits, applications, and how to choose one for a design.

November 19, 2021 by Craig Sanderson, Sager Electronics

PoE Standards for IoT Devices and Power Sourcing Equipment

In this Industry Article, we'll discuss PoE (Power over Ethernet) standards and power sourcing equipment (PSE), using office Internet of Things (IoT) devices as an example application.

November 16, 2021 by Rich Fry, TDK Corporation of America

The Role of Optical Sensors in Electronic Applications

This article outlines the principles of operation of optical sensors, optical sensor types, considerations for optical sensor selection, and key applications.

November 12, 2021 by ROHM Semiconductor

High-layer Count (HLC) PCB Technology for the 5G Era

One effective solution to the requirements of 5G technology is the use of HLC (High-layer Count) PCB boards that integrate key features such as skip vias, POVF manufacturing, advanced raw materials, and impedance control.

November 11, 2021 by Sarah Kuang, Kinwong

Understanding and Addressing 5 Key Power Supply Issues

This article will take a deeper look at five key power supply problems, how to know when they arise, and the best ways to address or mitigate them.

November 05, 2021 by Ron Stull, CUI

Design and Development of 5G Devices: 5G Performance Ranges

How can engineers choose the correct performance range for their 5G application?

October 06, 2021 by Brian Moran, Sager Electronics

Enabling Industrial Network Design with Time-Sensitive Networking

OT (operational technology) and IT (informational technology) may have different real-time needs, but they're merged in the TSN (time-sensitive networking) Ethernet-based standards. Learn about the theory and hardware involved in implementing TSN in industrial network design.

August 12, 2021 by Christian Castel, NXP

Harsh Environment Connector Plating: Meeting the Challenges of RoHS and REACH Compliance

Connector manufacturers and end-users are rapidly moving away from cadmium plating because it is no longer RoHS and REACH compliant. The health and environmental issues cadmium plating presents have led to revised standards and increasing demand for connector plating solutions that offer harsh environment performance comparable to cadmium but without its environmental side effects.

August 05, 2021 by Achim Raad, ITT Cannon

Understanding the Safety Standards for Smart Appliances

Which IEC power standards should you be familiar with when designing smart appliances? This article breaks down smart household device classification and power requirements for their design.

August 05, 2021 by Ron Stull, CUI

The Importance of Fans for Indoor Air Filtration Systems

How much do you know about IAQ (indoor air quality) and filtration system options for purifying air?

August 04, 2021 by Sager Electronics

Driving Motors in Battery-powered IoT Systems

Learn motor driver design techniques to help extend battery life in battery-powered motor systems.

July 29, 2021 by James Lockridge, Texas Instruments

How to Protect Low-Speed Interfaces and Power Supply Circuits

In this installation of the "Protect Your Ports! Top Design Tips to Keep Your Communications Connected" series, we'll discuss low-speed interfaces and power supply circuits—including audio/video ports, DC power supplies, and more—as well as various methods of how to protect them.

July 11, 2021 by Todd Phillips, Littelfuse

Optimizing Power Management with NXP’s i.MX RT500 Crossover MCU

This article provides an introduction to microcontroller power management concepts. The NXP i.MX RT500 family of crossover MCUs will be used to provide examples of how these power management concepts can be employed by embedded developers in their applications.

July 08, 2021 by Alejandra Guzman, NXP Semiconductors

Design Tips for Protecting High-Speed Interfaces

In this second installment of the "Protect Your Ports! Top Design Tips to Keep Your Communications Connected" series, we explore what protecting high-speed interfaces looks like, including USB, HDMI, DisplayPort, and eSATA.

June 29, 2021 by Todd Phillips, Littelfuse

Understanding DSP Enablement Using NXP’s i.MX RT500 Crossover MCU

Learn about multi-threaded programs, developing applications using the XOS real-time operating system, resource sharing with semaphores, and how NXP's i.MX RT500 family of microcontrollers help engineers design DSP-enabled smart devices.

June 24, 2021 by Jason Tseng, NXP Semiconductors

How Current-Sense Amplifiers Monitor Satellite Health

How do we know how a satellite in space is doing from here on Earth? Learn how current-sense amplifiers or CSAs are a crucial part of several satellite monitoring systems.

June 10, 2021 by Kyle Stone, Texas Instruments

Proximity Sensors: Reviewing the Different Technologies

Learn how four different types of proximity sensor technologies compare: ultrasonic, photoelectric, laser rangefinder, and inductive sensors.

May 20, 2021 by Jeff Smoot, CUI Devices

Power Supplies and Harsh Environments

In this article, we will discuss power supplies in harsh environments, the challenges, solutions, and available in-market products.

May 13, 2021 by Aaron Yarnell, CUI Inc.

Medical Applications for Micro-Force FMA Sensors

In this article, we will discuss the different applications of Micro-Force FMA Sensors in the health industry.

May 07, 2021 by Sager Electronics

Laser Diodes Enable Motion Sensing and Light-Based Distance Measurements (LiDAR)

In this article, ROHM will discuss the role of laser diodes in motion sensing and LiDAR, as well as their properties and limitations.

May 06, 2021 by ROHM Semiconductor