Latest Computers & Peripherals Industry Articles

Categories

How to Select DC Power Connectors: The Basics

This article aims to simplify the DC power connector selection process with an overview of types, key specifications, and commonly accepted nomenclature, while also looking at audio and USB connectors in power applications.

June 23, 2020 by Ryan Smoot, CUI Devices

Getting Started With the LPC5500 Series MCU Using NXP’s MCUXpresso IDE

This article introduces the MCUXpresso IDE, introducing important features and showing how to get started with programming the LPC65500 series MCU using a Hello World example.

June 11, 2020 by Mark Dunnett, on Behalf of NXP

The Features and Applications of LPC5500 Series Microcontrollers

Learn about the LPC5500 series of MCUs, including specs and features, available resources, and applications, which range from automated robots to industrial HMI.

May 28, 2020 by Mark Dunnett, on Behalf of NXP

The Role of Last-Level Cache Implementation for SoC Developers

There is a challenge for SoC developers to find ways to navigate the demand of memory in their design. This article looks at how a fourth, or last-level, cache can provide a solution.

May 12, 2020 by Kurt Shuler, Arteris

How RISC-V Security Stacks Strengthen Computer Architecture

In this article, Ted Speers of Microchip reflects on how RISC-V and its security stack offer a solution for the development of computer architecture and processor security.

November 26, 2019 by Ted Speers, Microchip

Finding a Solution to Extend the Run-Time of a DSLR/DSLM Camera Design

This article presents the challenges of powering a digital camera and proposes a new design approach to save power while being more flexible.

May 16, 2019 by Sami Nijim, Maxim Integrated

Decreasing the Length of Design Cycle in Co-Designed SoCs with Renode

In this article, we explain how the use of open-source functional simulators like Antmicro’s Renode can be an integral part of hardware-software co-design efforts.

April 16, 2019 by Greg Sullivan, Dover Microsystems

Keeping RISC-V-Based Embedded System Design Flexible with Linux and Zephyr microPlatforms

This article discusses Foundries.io's microPlatforms which support Intel, Arm, and RISC-V architectures and are designed to avoid lock-in to specific hardware implementations.

March 28, 2019 by Trina Watt, Foundries.io

Running Hard Real-Time Applications and Linux on PolarFire SoC

This article discusses the RISC-V-based SoC FPGA architecture for PolarFire SoC, which allows hard real-time applications and Linux applications to coexist.

March 26, 2019 by Tim Morin, Microchip

How Data-Centric Applications Can Capitalize on RISC-V Processor Innovation

This article explores how RISC-V, combined with open-source collaboration and standards, is enabling innovation and purpose-built technologies among software engineers, system architects, CTOs, and board designers. It also touches on the possible impact that RISC-V and open source trends could have on the future of data-centric application experiences.

March 20, 2019 by Ted Marena, Western Digital

How to Utilize the RISC-V Instruction Set CKB-VM

Part 3 of this series shows examples of the CKB-VM, a RISC-V instruction set based VM, in action in three different ways.

March 19, 2019 by Xuejie Xiao, Nervos

CKB-VM as a RISC-V Instruction Set: Inspiration, Design, and Benefits

Learn about CKB-virtual machine (VM), which is a RISC-V instruction set that utilizes RISC-V's open-source instruction set architecture.

March 12, 2019 by Xuejie Xiao, Nervos

Hybrid Memory Cubes: What They Are and How They Work

In this article, the engineering team at Promwad examines hybrid memory cubes (HMCs), which can provide a 15-fold increase in performance with up to a 70% energy savings per bit compared to DDR3 DRAM.

January 22, 2019 by Ivan Kuten, Promwad

How Do I Prep My PCB for Fabrication? Accelerating PCB Assembly with Design Best Practices

In this article, Parker Dillman, lead EE and co-founder of MacroFab, covers how to best prepare your PCB designs for fabrication and assembly.

January 15, 2019 by Parker Dillmann, MacroFab

Embedded System Design: Build from Scratch or Use an SBC?

This article explores the pros and cons of either designing embedded systems from scratch or utilizing pre-made single-board computers.

November 29, 2018 by Rudy Ramos, Mouser

Build a PWM Controller for PC Fans with GreenPAK

This article shows how to build a 12 V PC fan PWM controller with GreenPAK ICs.

July 26, 2018 by David Riedell, Dialog Semiconductor

A Quick Start to Embedded GUI Applications

This article discusses how designers can leverage a graphics library with a tightly-coupled graphics toolset to expedite GUI development in their projects.

July 17, 2018 by Bill Li, Microchip Technology

Circle the Wagons: Choosing the Right Protection ICs for Your Smart Load

This article reviews the fundamental features of an effective protection scheme, highlights the shortcoming of a typical protection implementation—such as a high bill of materials and PC board size occupation—and introduces a new family of integrated, highly flexible protection ICs that address these concerns.

June 05, 2018 by Maxim Integrated

Accelerating Embedded Vision Integration with Xilinx SoCs and the reVISION Stack

SoCs with programmable logic are an essential element of real-time embedded vision systems. Designers can capitalize on the power and efficiency of Xilinx's Zynq Ultrascale+ MPSoC devices to implement their designs using Avnet's Embedded Vision Kits and the Xilinx reVISION stack.

May 18, 2018 by Xilinx

Capturing 3D Images with Time-of-Flight Camera Technology

Time-of-flight (ToF) is a relatively new method by which it is possible to gather detailed 3D information. This article looks at ToF cameras and their applications.

May 15, 2018 by Mark Patrick, Mouser