Latest Sensors Industry Articles

Categories

Nothing to show for Sensors category yet. Here are some other industry articles that may interest you.

Will Energy Harvesting Be What Fuels the Growth of the IoT?

This article explores the challenge of constantly powering the billions of devices that make up the IoT and how energy harvesting could be an effective solution.

May 28, 2019 by Robert Huntley, Mouser

Designing Smart Meters with Circuit Protection, Sensing, and Power Control Capabilities

This article offers an overview of the various component options for smart meter design and how they can improve the operation of the meters into which they are designed.

December 04, 2018 by Philippe Di Fulvio, Littelfuse Inc

Integration of Isolation Products to Protect from Electrostatic Discharge

In any high voltage and electrical noise system, the electrostatic discharge (ESD) immunity, an important aspect of electromagnetic compatibility (EMC), is a key consideration in choosing a galvanic isolation device.

November 15, 2018 by Miller Henley

Tracking Every Neuron: The Future of Medical Research Lies in Processing Time

How is Stanford making use of high-speed memory in their latest research initiative?

April 19, 2018 by Justin Kirkham

Flexible ECG Front-End IC Serves Ultra Low-Power IoT Edge Node Signal Processing Designs

As system designers search for power efficient signal conditioning components, they may find that there are very few ICs available under 100 μ‎A supply current and even fewer that include a small package variant.

April 18, 2017 by David Plourde, Analog Devices

Harnessing Secure Microcontroller Know-How to Protect Connected Devices

As modern life increasingly moves online, more powerful secure microcontrollers and other secure ICs are emerging.

January 31, 2017 by Paul Golata, Mouser

Analysis of Wideband Pulse Signals with an Oscilloscope

This video shows how the R&S RTO oscilloscope with its vector signal explorer (VSE) software can be used to analyze wide band pulsed RF signals in terms of frequency, phase, amplitude, and timing.

October 02, 2016 by Rohde and Schwarz

How an Internal Faraday Shield and Small Ci-O Improve Optocoupler Galvanic Isolation

This article discusses how the use of three key design methods utilized in optocouplers improves galvanic isolation performance and presents an accompanying high voltage surge test as proof. 

3 days ago by Lim Shiun Pi, Broadcom Inc

Implementing LoRa-based Solutions for Smart Metering

This article explores the use of LoRa devices for long-range, low power smart metering of utilities, which allows for remote daily operations and the collection of data.

January 07, 2020 by Rémi Demerlé, Semtech

How Software Automation in PCBA Manufacturing Helps Quicken Innovation

Manufacturing still takes a large portion of time in the electrical engineering cycle. This article discusses how software-driven automation and the IIoT can help hasten the manufacturing process.

December 17, 2019 by Shashank Samala, Tempo Automation

Utilizing INICnet for Automotive Networking and Connectivity

In this article, learn about INICnet and how it helps to solve the question of how designers can create a safe and effective connectivity method for vehicles.

December 03, 2019 by Carmelo De Mola, Microchip

How RISC-V Security Stacks Strengthen Computer Architecture

In this article, Ted Speers of Microchip reflects on how RISC-V and its security stack offer a solution for the development of computer architecture and processor security.

November 26, 2019 by Ted Speers, Microchip

Severe Environment Testing: Providing Safety Qualifications for COTS Designs

This article introduces Severe Environment Testing (SET), a safety testing standard that bridges the gap between a full MIL-STD product and a COTS product to provide additional confidence in the safety of a COTS product.

November 19, 2019 by Brian Niehoff, Samtec

How Automated CDC Protocol Verification Accelerates Testing Processes

This article describes a methodology that automates set up, constraints, and results analysis as designs move from static CDC analysis to formal verification to simulation and avoid manual scripting efforts, thus reducing setup effort and errors.

November 14, 2019 by Kurt Takara, Mentor

How Choosing Oscillators over Crystals Reduces Time to Market and Project Costs

This article looks at the differences between crystal resonators and oscillators and presents examples that show when choosing crystals over oscillators could increase the total cost of a design.

November 05, 2019 by Bruce Potvin, SiTime

Trusted Execution Environments (TEEs) in Connected Cars

This article introduces trusted execution environments (TEEs), discussing ways these environments are currently being used and how they could be a security solution for connected cars.

October 29, 2019 by Katherine Hsu, Hex-Five Security

Determining Copper Trace Thickness in PCB Design

This article discusses the issues surrounding trace-width calculation and provides a solid foundation for designing your next high-current net.

October 22, 2019 by Mark Hughes, Advanced Assembly

How to Select the Right Aluminum Electrolytic Capacitor

Learn the characteristics of aluminum electrolytic capacitors and tips on how to properly select one for use in electrical designs.

October 15, 2019 by Norton Brissac, TDK Electronics

The Importance of Advanced ERC in Circuit Design

This article introduces and explores advanced ERC, highlighting its differences from traditional ERC and discussing how it can help create better circuit designs.

September 17, 2019 by Derong Yan, Mentor

The Journey of RISC-V Implementation

In this article, Western Digital's Ted Marena explores the reasons companies have and the process they go through when integrating the open process instruction set architecture RISC-V.

September 10, 2019 by Ted Marena, Western Digital

Meeting ASIL Compliance for ADAS with an Integrated SoC Power System Monitor

This article looks at the safety standard that governs ADAS features and the challenge in designing power monitoring systems to comply with this standard while introducing an automotive power monitor that has been certified to meet this standard.

September 06, 2019 by Michael Jackson, Maxim Integrated

Time-of-Flight Sensors for In-Cabin Vehicle Safety

This article looks at how time-of-flight sensing in a vehicle's cabin can improve safety and convenience.

August 21, 2019 by Gualtiero Bagnuoli, Melexis

RISC-V’s Role in Securing IoT-Connected Devices

RISC-V hardware offers additional security for IoT-connected embedded devices beyond software cybersecurity.

July 23, 2019 by Jothy Rosenberg, Dover Microsystems

Using Operational Amplifiers as Comparators

This article discusses the specifications and characteristics to consider when using op-amps as comparators and provides a design procedure.

July 16, 2019 by Tim Claycomb, Texas Instruments

Open Memory-Centric Architectures Enabled by RISC-V and OmniXtend

This article discusses technologies for memory-centric computing and introduces OmniXtend, a cache coherence protocol.

July 09, 2019 by Ted Marena, Western Digital

Utilizing DC-DC Converters in Space-Critical Power System Applications

Power system designers are constantly under pressure because they are tasked with developing highly adaptive solutions that comply with today’s operating environments without interrupting design-to-manufacture cycles.

June 28, 2019 by MINMAX

Enhancing Battery-Powered End Nodes Through Better Power Supply Design

Novel approaches to end node power supply design using switched-mode converters can enable a wireless end node to operate from a CR2032 lithium coin cell with up to +20 dBm transmit power.

June 25, 2019 by Josh Norem, Silicon Labs