Category: Converters

2-wire analog outputs with precision DACs

2-wire analog outputs with precision DACs

Supplied: Texas Instruments

3-wire analog outputs with precision DACs

3-wire analog outputs with precision DACs

Supplied: Texas Instruments

AC & DC Specifications: Offset Error, Gain Error, CMRR, PSRR, SNR, and THD

This video is part of the TI Precision Labs – ADCs curriculum.  It highlights the key AC & DC specifications including offset error, gain error, common mode rejection ratio (CMRR), power supply rejection ratio (PSRR), signal to noise ration (SNR), and total harmonic distortion (THD).

Supplied: Texas Instruments

AC & DC Specifications: Offset Error, Gain Error, CMRR, PSRR, SNR, and THD

Thisvideo is part ofthe TI Precision Labs ADCs curriculum. It highlights the key AC & DC specifications including offset error, gain error, common mode rejection ratio (CMRR), power supply rejection ratio(PSRR), signal to noise ration (SNR), and total harmonic distortion (THD).

Supplied: Texas Instruments

ADC32RF45: 1-GHz Bandwidth RF Sampling Solution

The ADC32RF45 RF Sampling ADC is a dual channel, 14-bit, 3-GSPS ADC. This video showcases how the RF sampling device supports 1-GHz signal bandwidths and beyond for next generation receiver systems.

Supplied: Texas Instruments

ADC32RF80: RF Sampling Telecom Receiver Quick-Start

The ADC32RF80 telecom receiver is a dual channel, 14-bit, 3-GSPS ADC with integrated dual DDC (Digital Down Converter).  This video shows how to get up-and-running with the EVM and software in less than 5 minutes.

Supplied: Texas Instruments

Aliasing and Anti-aliasing Filters

This video is part of the TI Precision Labs – ADCs curriculum.  It introduces the concept of frequency domain aliasing and describes how aliases are error sources that we want to avoid or minimize.  It also covers how an anti-aliasing filter can be used to minimize these aliasing errors.

Supplied: Texas Instruments

Amplifiers and bits: An introduction to selecting amplifiers for data converters

Amplifiers and bits: An introduction to selecting amplifiers for data converters

Supplied: Texas Instruments

Automotive RADAR with precision DACs

Automotive RADAR with precision DACs

Supplied: Texas Instruments

Average Current Mode Control of Bidirectional DCDC Systems

This presentation will cover the modeling of average current mode control (ACMC) for both buck and boost converters.

Supplied: Texas Instruments

Bidirectional DC/DC converter topology comparison and design

Learn about the basic design guidelines for bidirectional DC/DC converters in hard- and soft-switching modes. 

Supplied: Texas Instruments

Building the SAR ADC Model

This video is part of the TI Precision Labs – ADCs curriculum.  It walks through the process of creating a TINA Spice Model for a SAR ADC by using datasheet specifications.

Supplied: Texas Instruments

Building the SAR ADC Model

Thisvideo is part ofthe TI Precision Labs ADCs curriculum. It walks through the process of creating a TINA Spice Model for a SAR ADC by using datasheet specifications.

Supplied: Texas Instruments

Calculating the Total Noise for ADC Systems

This video is part of the TI Precision Labs – ADCs curriculum.  It walks through how to predict the overall system noise for an ADC, amplifier, and reference using datasheet specifications and a SPICE simulation.

Supplied: Texas Instruments

Calculating the Total Noise for ADC Systems

Thisvideo is part ofthe TI Precision Labs ADCs curriculum. It walks through how to predict the overall system noise for an ADC, amplifier, and reference using datasheet specifications and a SPICE simulation.

Supplied: Texas Instruments

Choosing the Best ADC Architecture for Your Application: Part 1 - Introduction & Overview

Choosing the Best ADC Architecture for Your Application: Part 1 - Introduction & Overview

Supplied: Texas Instruments

Choosing the right PFC topology: 100W to several kW

In this session we will look at the key features and trade-offs between 6 popular PFC topologies.Download readily available reference designs for each of the mentioned topologies.

Supplied: Texas Instruments

Choosing the right PFC topology: 100W to several kW

In this session we will look at the key features and trade-offs between 6 popular PFC topologies.Download readily available reference designs for each of the mentioned topologies.

Supplied: Texas Instruments

Code-to-code glitch: source and how to remove it

Code-to-code glitch: source and how to remove it

Supplied: Texas Instruments

Coherent Sampling and Filtering to Improve SNR and THD

This video is part of the TI Precision Labs – ADCs curriculum.  It introduces a measurement technique called “coherent sampling” which can be used to get the best possible ADC characterization results.  Also covered in this lab is a test method that uses an external filter to reduce noise and distortion on the input signal to a level where it allows for accurate characterization of the…

Supplied: Texas Instruments