Latest User Interface Technical Articles

Categories

Understanding Multi-Faceted Modeling Within Fusion 360

Documentation within the project pipeline is essential and design modeling is no different. In this article, learn about how to leverage the different modeling methods in Fusion 360.

5 days ago by Sam Sattel, Autodesk

Getting Started With the LPC5500 Series MCU Using NXP’s MCUXpresso IDE

This article introduces the MCUXpresso IDE, introducing important features and showing how to get started with programming the LPC65500 series MCU using a Hello World example.

June 11, 2020 by Mark Dunnett, on Behalf of NXP

GPIO Interrupt Comparison for Three Popular Microcontrollers from TI, Microchip, and STMicro

Compare the GPIO interrupts of three popular microcontrollers: the Texas Instruments CC2544, the Microchip ATmega328P, and the STMicroelectronics STM32L151C6.

October 05, 2019 by Philip Asare

Interrupts for Peripherals: Timers, Serial Communication, and ADCs

Learn about interrupts for some familiar peripherals: timers, serial communication, and ADCs.

October 03, 2019 by Philip Asare

Principles of Cache Design

This article will examine principles of CPU cache design including locality, logical organization, and management heuristics.

July 11, 2019 by Stephen St. Michael

Decreasing the Length of Design Cycle in Co-Designed SoCs with Renode

In this article, we explain how the use of open-source functional simulators like Antmicro’s Renode can be an integral part of hardware-software co-design efforts.

April 16, 2019 by Greg Sullivan, Dover Microsystems

How to Choose Microcontroller Peripherals for Digital Signal Processing Applications

This article continues a discussion of microcontroller features and characteristics that are particularly important when you’re thinking in terms of DSP capabilities.

April 08, 2019 by Robert Keim

What Is a Microcontroller? The Defining Characteristics and Architecture of a Common Component

In this article we’ll look at the defining characteristics of these extremely popular ICs, and then we’ll explore the internal architecture.

March 25, 2019 by Robert Keim

The Electrical Engineer’s Guide to Instruction Set Architectures (ISAs)

This article explores some important details related to the design and functionality of processors.

August 15, 2018 by Robert Keim

What Is Embedded System Design? Defining an Electrical Engineering Field

Could you concisely define "embedded system design" off the top of your head? This article looks at the essential characteristics of an increasingly prominent specialization within the field of electrical engineering.

August 06, 2018 by Robert Keim

A Quick Start to Embedded GUI Applications

This article discusses how designers can leverage a graphics library with a tightly-coupled graphics toolset to expedite GUI development in their projects.

July 17, 2018 by Bill Li, Microchip Technology

Troubleshooting Tools for Your Next Bluetooth LE Project: Ubertooth and the Nordic nRF Sniffer

Bluetooth LE was designed with the IoT in mind. Here are some options for troubleshooting your next Bluetooth LE project.

July 14, 2017 by Mark Hughes

Breadboarding and Programming the ATmega328P & ATtiny45 in Atmel Studio 7

In this project, we'll build circuits for programming two different Atmel microcontrollers and we'll discuss the necessary software setup.

July 12, 2017 by Charles R. Hampton

“Everything is Better with Bluetooth”:  Add Your Own Custom Bluetooth LE to Your Next Project

Bluetooth low energy (BLE) is designed to intermittently transmit information using a limited amount of power. This article provides the building blocks that allow you to add BLE to your projects for $5 (plus a one-time purchase of a $15 programmer).

June 28, 2017 by Mark Hughes

Adding a Capacitive Touch Display Module to the BeagleBone Black

Pair a BeagleBone Black with a capacitive touch LCD display to create a development platform for small, cost-effective solutions.

June 13, 2017 by Markku Riihonen, 4D Systems

Build an Arduino 101 Data Logger with the TI SensorTag

Use an Arduino/Genuino 101, a TI SensorTag, and an SD shield to build a BLE multi-sensor data logger that records temperature, humidity, atmospheric pressure, ambient light and more.

June 07, 2017 by Raymond Genovese

Add Voice Commands to Your Next Project with Bluetooth LE

This project uses the Alorium Technology XLR8, a Bluetooth LE HID Implementation, and the EasyVR voice recognition module to add voice-activated movements to your next project.

May 17, 2017 by Mark Hughes

How to Flash ESP-01 Firmware to the Improved SDK v2.0.0

Learn about SKD v2.0.0 and how flashing your ESP-01's firmware just got easier.

March 17, 2017 by Charles R. Hampton

Creating Novel Linux Controllers for Wearable Devices

Embedded and wearable systems require new ideas for input controller hardware. But older software still expects a keyboard and mouse. How do we bridge the gap without having to write kernel drivers?

October 04, 2016 by Jeremy Lee

C-BISCUIT: Robot System Architecture

The C-BISCUIT saga continues as we combine the various system components into a demo bot.

September 08, 2016 by Robert Keim