IDS-2304A Oscilloscope

Iso-Tech - IDS-2304A

IDS 2000A Series DSO comes along with a high-value design framework and a large screen color LCD display to perform very fast waveform acquisition and procession utilizing VPO technology. Waveform Search and Segmented Memory are available to facilitate the search event of interest from the long record length. The ping-pong waveform acquisition design and advanced VPO-technology-based waveform procession system greatly enchance the speed and quality of waveform display. The optional logic analyzer funcion allows the signal acquisition through logic triggering and enables the logic and analog waveforms to be shown on the same screen for comparison and time correlation analysis. This Mixed Signal Oscilloscope (MSO) function is field-installable with a plug-in module. It supports I2C/SPI/UART serial bus trigger and decoding

  • Bandwidth: 300 MHz
  • Analog Channels: 4
  • Digital Channels: 16
  • Max Sample Rate: 2 GS/s
  • Max Memory Depth: 2 Mpts
  • Operating System: Embedded
  • Form Factor: Benchtop
Related Products

Iso-Tech IDS-2072A

Bandwidth: 70 MHz

Analog Channels: 2

Digital Channels: 16

Max Sample Rate: 2 GS/s

Max Memory Depth: 2 Mpts

Operating System: Embedded

Form Factor: Benchtop

Iso-Tech IDS-2074A

Bandwidth: 70 MHz

Analog Channels: 4

Digital Channels: 16

Max Sample Rate: 2 GS/s

Max Memory Depth: 2 Mpts

Operating System: Embedded

Form Factor: Benchtop

Iso-Tech IDS-2204A

Bandwidth: 200 MHz

Analog Channels: 4

Digital Channels: 16

Max Sample Rate: 2 GS/s

Max Memory Depth: 2 Mpts

Operating System: Embedded

Form Factor: Benchtop

SHARE
1 Comment
  • G
    Gerod May 04, 2023

    I cannot switch from DC-mode t AC-mode. Display shows AC, but meassurement is still DC. What can I do to get AC-mode?

    Like. Reply