There are five models in this family of Fluke oscilloscopes. Each of these models is a combination of an analog real-time oscilloscope and a fully featured digital storage oscilloscope. By pressing a single push button, you can switch the instrument from the analog mode to the digital mode and back. This allows each of the units to be used in an optimum operating mode for all kinds of signal conditions. Complex data streams, modulated waveforms, and video signals can often best be seen in the analog mode of operation. The digital mode of operation is more suited for single events, signals with low repetition frequencies, and when automatic measurements need to be performed.
Bandwidth: 100 MHz
Analog Channels: 2
Digital Channels: 0
Max Sample Rate: 0.2 GS/s
Max Memory Depth: 0.032 Mpts
Operating System: Embedded
Form Factor: Benchtop
Bandwidth: 200 MHz
Analog Channels: 2
Digital Channels: 0
Max Sample Rate: 0.2 GS/s
Max Memory Depth: 0.032 Mpts
Operating System: Embedded
Form Factor: Benchtop
Bandwidth: 60 MHz
Analog Channels: 2
Digital Channels: 0
Max Sample Rate: 0.2 GS/s
Max Memory Depth: 0.032 Mpts
Operating System: Embedded
Form Factor: Benchtop