Toshiba Introduces Its First Family of Reusable eFuse ICs

Toshiba Introduces Its First Family of Reusable eFuse ICs

The TCKE8xx series instantly shuts off when extreme overheating, overcurrent, or a short circuit is detected.


News Nov 21, 2019 by Gary Elinoff
Skyworks’ PA Geared to Support 5G Signals With Wide Instantaneous Bandwidth

Skyworks’ PA Geared to Support 5G Signals With Wide Instantaneous Bandwidth

The SKY66318-11 features a wide instantaneous bandwidth for 100MHz systems, which is said to enable higher data rates for 4G LTE and 5G signals.


News Nov 21, 2019 by Lisa Boneta.
NIC Components’ SMT Power Inductors Built to Operate Up to +155°C

NIC Components’ SMT Power Inductors Built to Operate Up to +155°C

The NPIM_PE series are automotive-grade metal composite SMT power inductors with an operating temperature range of ‐55°C to +155°C.


News Nov 20, 2019 by Cabe Atwell
ROHM Touts 200V Schottky Diodes for Ultra-Low Leakage Current

ROHM Touts 200V Schottky Diodes for Ultra-Low Leakage Current

The latest line of RBxx8 Schottky diodes is able to withstand 200V forward voltage while their predecessor was able to withstand up to 150V.


News Nov 20, 2019 by Robin Mitchell
Nexperia Enters the Gallium Nitride FET Arena

Nexperia Enters the Gallium Nitride FET Arena

Nexperia's newly announced GAN063-650WSA is a 650-volt gallium nitride power FET featuring an RDS(on) of 60 mΩ.


News Nov 20, 2019 by Gary Elinoff
Noise in Electronics Engineering: Distribution, Noise RMS and Peak-to-Peak Value, and Power Spectral Density

Noise in Electronics Engineering: Distribution, Noise RMS and Peak-to-Peak Value, and Power Spectral Density

In this article, we’ll first examine an important feature of common noise sources: the relationship between the noise root mean square (RMS) and peak-to-peak value.


ST Highlights New Temperature Sensors’ Accuracy—to Within 0.25°C

ST Highlights New Temperature Sensors’ Accuracy—to Within 0.25°C

The STTS22H from STMicroelectronics typically draws 0.5 µA in standby mode.


News Nov 19, 2019 by Gary Elinoff
COTS Testing and Design for Safety with Samtec’s SET Initiative

COTS Testing and Design for Safety with Samtec’s SET Initiative

This article introduces Severe Environment Testing (SET), a safety testing standard that bridges the gap between a full MIL-STD product and a COTS product to…