Enter to Win an Infineon Technologies XMC7100 Evaluation Board!

XMC7100 Evaluation Board

The XMC7100 Evaluation Board enables you to evaluate and develop your applications using the XMC7100D microcontroller (hereafter called “XMC7100D”).

XMC7100D is designed for industrial applications. XMC7100D is a true programmable embedded system-onchip, integrating up to two 250 MHz Arm® Cortex®-M7 as the primary application processors, 100 MHz Arm® Cortex®-M0+ that supports low-power operations, up to 4 MB flash and 768 kB SRAM, Ethernet, Controller Area Network Flexible Data-Rate (CAN FD), programmable analog and digital peripherals that allow faster time-to-market.

The evaluation board has two Infineon’s shield2Go standard headers (S2GO) and a mikroBus header for interfacing sensors, and headers compatible with Arduino for interfacing Arduino shields. In addition, the board features an onboard programmer/debugger (KitProg3), a 512 Mbit QSPI NOR flash, CAN FD transceiver, standard 10/100 Base Tx Ethernet PHY transceiver with RJ45 connector interface, a micro-B connector for USB device interface, two user LEDs, one potentiometer, and two push buttons. The board supports operating voltages from 3.3 V to 5.0 V for XMC7100D.

ModusToolbox™ software is used to develop and debug the XMC7100D projects. ModusToolbox™ is a set of tools that enable you to integrate these devices into your existing development methodology. For more details on XMC7100D, see the AN234334 - Getting started with XMC7000 MCU on ModusToolbox™ software application note, which aids in creating a customized design using the Eclipse IDE for ModusToolbox™.

XMC7100 Evaluation Kit

Infineon Technologies XMC7100 Evaluation Kit (KIT_XMC71_EVK_LITE_V1) includes an XMC7100 evaluation board, USB Type-A to Micro-B cable, and a quick start guide. The XMC7100 evaluation board evaluates and develops applications using the XMC7100D microcontroller. This lite evaluation board includes shield Go standard headers (S2GO) and a mikroBus header for interfacing sensors, and Arduino compatible with headers for interfacing Arduino shields. The XMC7100 board features a 512Mbit QSPI NOR flash, CAN FD transceiver, onboard programmer/debugger (KitProg3), and two push buttons. This board is used in robotics, industrial drives, I/O devices, and Battery Management Systems (BMSs).

Development Tools

Infineon Development Tools offer a wide selection to enable the engineer's unique design, regardless of the target application. These range from LED lighting, power management, sensors, analog & digital ICs, communication, optoelectronic, and embedded development tools.

Features

• 512Mbit external Quad SPI NOR flash provides expandable memory for data and code
• KitProg3 onboard SWD programmer/debugger, USB-UART, and USB-I2C bridge functionality
• Mode button and a mode LED for KitPorg3
• Headers compatible with Arduino Uno R3
• Headers compatible with mikroBus shields
• CAN FD interface
• Micro-B connector for USB device interface
• Potentiometer to stimulate analog sensor output
• Two user LEDs, two user buttons, and a reset button for the XMC7100D microcontroller
• Selectable input supply voltages of 3.3V and 5V for the XMC7100D

Applications

• Robotics
• Industrial drives
• I/O devices
• Battery Management Systems (BMSs)

Kit Contents

• XMC7100 evaluation board
• USB Type-A to Micro-B cable
• Quick start guide