All About Circuits
All About Circuits

Industry White Paper

The Electrical Engineer’s Desk Guide

Bridge the gap between PCB manufacturing and real-world electronics design with Summit Interconnect’s Electrical Engineering Desk Guide, covering fabrication, stack-up, EMI, power delivery, and regulation fundamentals that drive manufacturable, high-performance hardware.

February 18, 2026 by Summit Interconnect
Topics Covered
What are stitching vias?
What design parameters add cost, time, and complexity to PCB manufacturing?
What are some sources of EMI on a PCB?
PCB Bring-Up & Testing

Guide Overview

Bridge the gap between printed circuit board manufacturing and real-world electronics design with this Electrical Engineering Desk Guide from Summit Interconnect. It explains how printed circuit boards are fabricated and assembled, along with the design constraints that influence signal integrity, EMI, thermal performance, and cost, giving engineers practical insight into how layout decisions translate to manufacturable hardware. 


• How trace spacing, vias, and stack-up affect impedance and EMI
• Decoupling vs. bulk capacitor placement for stable power delivery
• RC filter behavior and cutoff selection in real circuits
• LDO vs. buck regulator trade-offs and PWM control basics


Download the desk guide to refresh your understanding of the circuit fundamentals that directly impact PCB performance.

Read Guide:

Already an All About Circuits member? Please Click Here to login.
Fields containing * are required