New Industry Products

Microchip’s MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast and easy debugging and programming of PIC®, AVR and SAM Microcontrollers, and dsPIC® Digital Signal Controllers...

NXP i.MX 8X Multisensory Enablement Kit is a platform for developing efficient, safety-certifiable designs for industrial and automotive applications based on the i.MX 8X processor family....

Littelfuse P-S4-LRP 100A SIDACtor® Protection Thyristors are designed to protect video equipment and other low voltage communications interfaces from overvoltage transients....

Samtec MEC5 Extreme Density Micro Edge Card Sockets are ultra-fine-pitch sockets that can be used with standard tolerance PCBs for lower cost and higher yields....

Bourns BPS110 and BPS120 pressure sensors offer extreme sensitivity and stability at extremely low pressures and are designed for medical devices, industrial applications, and consumer...

AVX F9H series are high-reliability solid tantalum electrolytic capacitors for use in applications such as automotive ECUs and industrial equipment....

Murata DSQ, DAQ, and DCQ series 600W DC/DC converters are DOSA compliant ¼ brick converters with an isolated, fully-regulated 12V output....

KEMET Electronics Piezoelectric R11 Acoustic Module uses the piezoelectric longitudinal effect to generate vibration and sound from the panel surface it is attached to, producing sound that is...

AVX TCJ and TCM polymer chip capacitors offer very low ESR, a wide range of package sizes, and voltage ratings up to 125 volts.

Analog Devices DC2464A-A and A-B demo boards highlight the performance of the LTC3351 Hot Swappable Supercapacitor Charger, Backup Controller, and System Monitor....

ROHM Semiconductor BH1792GLC Optical Sensor IC is an integrated heart rate monitor IC for wearables and other portable devices.

Microchip’s dsPIC33CH Curiosity Development Board is a cost-effective platform to demonstrate the benefits of the dual independent cores in the dsPIC33CH family, which is optimized for...

Panasonic Polymer and Film MLCC Alternatives can replace several MLCCs with a single capacitor while offering performance and safety advantages....

NT Series ThermoFuse varistors offer voltage ratings up to 750 volts RMS and surge current capability up to 10,000 amps, with a maximum energy absorption of 480 joules for 2 milliseconds....

TDK’s EPCOS NT ThermoFuse Varistors have an integrated thermal fuse that trips if the varistor overheats, isolating the varistor and increasing the reliability of protected equipment....

Microchip Technology’s SAM R34 LoRa Sub-GHz System-in-Package family integrates an Arm® Cortex®-M0+ MCU, LoRa transceiver and software stack to reduce time to market for IoT designs....

Molex Perma-Seal terminals and splices can withstand all that and more, and they’re available for wire sizes 8 to 22 gauge.

Semtech SX1262 development kits provide designers with a platform to evaluate and develop the SX1262® LoRa RF Transceivers in low-power, long-range wireless communication applications....

NXP Semiconductor’s i.MX RT1060 Crossover Processor can be used in a wide range of applications from professional audio, consumer products, home, and building automation to motor control,...