Analog Devices ADRF5700 series digital attenuators are 40GHz silicon attenuators for use in industrial scanners, 5G infrastructure, test and instrumentation, and other RF applications.
April 11, 2019 by Mouser Electronics
Microchip’s SAMA5D2 Xplained Ultra evaluation kit is a fast prototyping and development platform for the SAMA5D2 series of microprocessors.
April 08, 2019 by All About Circuits
Phoenix Contact QUINT Power supplies are pre-configured for active signal monitoring and can be configured with analog, digital and relay contacts.
April 04, 2019 by TTI, Inc
Texas Instruments’ AWR1642 BoosterPack™ is an evaluation module for the AWR1642 single-chip automotive radar sensor.
April 04, 2019 by Mouser Electronics
Microchip’s SAME54 Xplained Pro Evaluation Kit enables the development of low-power and secure connected designs for industrial and automotive applications.
April 01, 2019 by All About Circuits
Renesas Electronics’ TB-S1JA Synergy Target Board is a development and evaluation board for the S1JA Synergy MCU group.
March 25, 2019 by Mouser Electronics
Micron Multichip Packages provide designers multiple types of high-performance memory in a single package.
March 17, 2019 by Mouser Electronics
Taiyo Yuden’s EYSLSNZWW Bluetooth Low Energy 5.0 Module provides wireless connectivity and advanced processing in a compact package ideal for wearables and IoT devices.
March 11, 2019 by Mouser Electronics
RECOM Power RPM Low-Profile DC/DC Converters are compact, high density power modules for use in IoT, Industry 4.0, and Point-of-Load applications.
March 08, 2019 by Mouser Electronics
Hirose Electric ER8 Board-to-Board connectors are robust and compact high-speed connectors for use in applications including commercial devices, motor control, medical equipment, and industrial machinery.
March 07, 2019 by Mouser Electronics
Texas Instruments’ TAS5805MEVM audio amplifier evaluation module is based on the TAS5805M, a digital input, closed-loop Class D audio amplifier.
February 28, 2019 by Mouser Electronics
TE Connectivity Ethernet Switches with M12 Connectivity are unmanaged ethernet switches designed for use in heavy industrial, rail, and other public transportation applications.
February 27, 2019 by Mouser Electronics
STMicroelectronics Predictive Maintenance & Condition Monitoring Kit is a compact reference design for condition monitoring and predictive maintenance for industrial motors, pumps, and fans.
Renesas Electronics ISL9241EVAL1Z Evaluation Board demonstrates the performance of the ISL9241 buck-boost battery charger for 2-, 3-, and 4-cell Li-ion batteries.
February 25, 2019 by Mouser Electronics
Samtec MEC5 Extreme Density Micro Edge Card Sockets are ultra-fine-pitch sockets that can be used with standard tolerance PCBs for lower cost and higher yields.
February 20, 2019 by Mouser Electronics
Bourns BPS110 and BPS120 pressure sensors offer extreme sensitivity and stability at extremely low pressures and are designed for medical devices, industrial applications, and consumer applications.
February 20, 2019 by TTI, Inc
AVX F9H series are high-reliability solid tantalum electrolytic capacitors for use in applications such as automotive ECUs and industrial equipment.
February 18, 2019 by Mouser Electronics
Murata DSQ, DAQ, and DCQ series 600W DC/DC converters are DOSA compliant ¼ brick converters with an isolated, fully-regulated 12V output.
February 16, 2019 by Mouser Electronics
Analog Devices DC2464A-A and A-B demo boards highlight the performance of the LTC3351 Hot Swappable Supercapacitor Charger, Backup Controller, and System Monitor.
February 13, 2019 by Mouser Electronics
TDK’s EPCOS NT ThermoFuse Varistors have an integrated thermal fuse that trips if the varistor overheats, isolating the varistor and increasing the reliability of protected equipment.
February 06, 2019 by Mouser Electronics
Don't have an AAC account? Create one now.
Forgot your password? Click here.