RECOM Power RAC15-K and RAC20-K AC-DC Power Supplies are 15 W and 20 W supplies that are optimized for always-on and…
RECOM Power RAC15-K and RAC20-K AC-DC Power Supplies are 15 W and 20 W supplies that are optimized for always-on and standby mode operation in IoT and smart devices.
Maxim Integrated’s MAX20303 Wearable Power Management Solution is designed to the power management requirements of…
Maxim Integrated’s MAX20303 Wearable Power Management Solution is designed to the power management requirements of wearables, extending battery life and minimizing footprint through the integration of multiple micro-quiescent regulators and a haptic driver.
Nordic Semiconductor’s nRF52840 Multi-Protocol SoC is an ultra-low power, highly flexible SoC for short-range wireless…
Nordic Semiconductor’s nRF52840 Multi-Protocol SoC is an ultra-low power, highly flexible SoC for short-range wireless applications, including advanced wearables, IoT devices, advanced remote controls, and gaming controllers.
Maxim’s MAX30001 is a complete biopotential and bioimpedance analog front end for wearables, offering high performance…
Maxim’s MAX30001 is a complete biopotential and bioimpedance analog front end for wearables, offering high performance and low power consumption.
ROHM’s BD71815AGW PMIC for Battery Powered Systems combines multiple power functions in a single package to simplify…
ROHM’s BD71815AGW PMIC for Battery Powered Systems combines multiple power functions in a single package to simplify power system design in wearables, media players, and other portable devices.
Some people have a hard time asking for directions, which is what makes GNSS systems like GPS so great.
Some people have a hard time asking for directions, which is what makes GNSS systems like GPS so great.
ON Semiconductor’s RSL10 is the industry’s lowest power BLE radio SoC, with the lowest power consumption in peak…
ON Semiconductor’s RSL10 is the industry’s lowest power BLE radio SoC, with the lowest power consumption in peak receiving and deep sleep modes.
TI’s HDC2010 is a highly accurate, 14-bit, low power temperature and humidity sensor in a compact WLCSP package.
TI’s HDC2010 is a highly accurate, 14-bit, low power temperature and humidity sensor in a compact WLCSP package.
Panasonic’s MC Series eMMC storage media use high-reliability MLC NAND and a controller that supports enhanced ECC and…
Panasonic’s MC Series eMMC storage media use high-reliability MLC NAND and a controller that supports enhanced ECC and wear leveling for reliable storage in critical applications.
TI’s TMP116 is a low-power, high-accuracy digital temperature sensor that consumes less power and is easier to use than RTDs.
TI’s TMP116 is a low-power, high-accuracy digital temperature sensor that consumes less power and is easier to use than RTDs.
Bosch Sensortec’s BME680 combines gas, air pressure, humidity, and ambient temperature sensing into a small, low-cost,…
Bosch Sensortec’s BME680 combines gas, air pressure, humidity, and ambient temperature sensing into a small, low-cost, and low power package for IoT, mobile, and wearable devices.
Taiyo Yuden’s EYSHSNZWZ Bluetooth Low Energy module is a tiny Bluetooth 5 ready module that integrates the crystal and…
Taiyo Yuden’s EYSHSNZWZ Bluetooth Low Energy module is a tiny Bluetooth 5 ready module that integrates the crystal and antenna so developers without RF expertise can integrate BLE into space-constrained applications, including wearables and smart accessories.
NXP’s NTAG I2C Plus Explorer Kit is a platform for demonstration and development using NXP’s NTAG I2C plus second…
NXP’s NTAG I2C Plus Explorer Kit is a platform for demonstration and development using NXP’s NTAG I2C plus second generation connected NFC tags.
STMicroelectronics BlueNRG-1 BLE wireless SoC that enables smaller, lower power BLE devices that are easier to implement.
STMicroelectronics BlueNRG-1 BLE wireless SoC that enables smaller, lower power BLE devices that are easier to implement.
Infineon’s Sensor Hub Nano is a battery-powered, Bluetooth-connected prototyping and evaluation platform for the DPS310…
Infineon’s Sensor Hub Nano is a battery-powered, Bluetooth-connected prototyping and evaluation platform for the DPS310 pressure sensor.
Facebook
Google
GitHub
Linkedin