We’ll continue our discussion of the C-BISCUIT demo bot by looking at portions of the RCB schematic that weren’t covered in the previous article.
We’ll continue our discussion of the C-BISCUIT demo bot by looking at portions of the RCB schematic that weren’t covered in the previous article.
This project covers integrating servo control and object detection.
This project covers integrating servo control and object detection.
Learn how to communicate between your PC and the SAM4S using the Atmel Software Framework’s USB module and simple ASCII…
Learn how to communicate between your PC and the SAM4S using the Atmel Software Framework’s USB module and simple ASCII commands.
Part One in this two-article series focuses on the hardware setup and on using a pulse-width-modulated signal to control a servo.
Part One in this two-article series focuses on the hardware setup and on using a pulse-width-modulated signal to control a servo.
Controlling a motor with an Arduino is relatively easy. In addition to simply spinning the motor, you can control the…
Controlling a motor with an Arduino is relatively easy. In addition to simply spinning the motor, you can control the position of the motor shaft if the motor has a rotary encoder.
Facebook
Google
GitHub
Linkedin