Latest Communication Projects

Categories

Nothing to show for Communication category yet. Here are some other projects that may interest you.

Learn to Build a Photoelectric Sensor System Using an Arduino Uno and OpenPLC

Since photoelectric sensing can be achieved with electrical, electromechanical, and electronic components, learn to build, test, and implement a prototype photoelectric switch using off-the-shelf components with Arduino OpenPLC.

March 12, 2023 by Don Wilcher

Magnetic Field Strength Meter and Calibrator

This project will explain how to develop a system to measure magnetic field emissions at frequencies up to 150 kHz from high-current power cables without cutting or disturbing the cable.

October 28, 2022 by John Woodgate

Build Your Own Voice-Activated Home Automation System with the Gentleman Maker’s Posh Butler

Learn how to use a Raspberry Pi to make your own posh home automation system!

February 24, 2019 by Robin Mitchell

How to Design a Super Simple Sensor System for Industrial Monitoring Applications

This article describes an Ethernet-connected subsystem of a larger modular sensor system designed for industrial or smart home sensing and monitoring. We will discuss a custom sensor subsystem developed for this application.

September 12, 2018 by Mark Hughes

Hardware Evaluation of a Custom Programmable Wi-Fi Controller: The WiCard

This article explores the schematic design and basic features of a smart programmable wireless controller module I designed: the WiCard.

June 01, 2018 by M. Mahdi K. Kanan

How to Stream Sensor Data from Bosch’s XDK110 Evaluation Board to the MQTT Messaging Service

In this article, we will take a look at the XDK110 rapid prototyping kit, characterize its hardware, explore its software environment, and demonstrate connecting the device to the MQTT messaging service.

April 12, 2018 by Mark Hughes

How to Make an IoT Teapot | The Gentleman Maker

No longer will you have to get off the couch or out of your warm bed to get the pot brewed!

February 28, 2018 by Robin Mitchell

How to Check and Calibrate a Humidity Sensor

How accurate is your humidity sensor? Find out with this project.

November 29, 2017 by Raymond Genovese

How to Interface an Ultrasonic Sensor with an LCD Using a Microcontroller Dev Kit

Let's interface an ultrasonic sensor and a lighting system! In this project, we'll design a sensor subsystem and then use it in a parking sensor application.

November 02, 2017 by Nick Davis

Build a Temperature and/or Humidity Controlled Fan with a Picaxe 08M2 Microcontroller

A Picaxe 08M2 microcontroller and an HIH6030 sensor team up to easily control a ventilation fan using temperature or humidity or both.

September 25, 2017 by Raymond Genovese

How to Protect Your Robot with Automatic Collision Detection

In this article, we’ll develop and test an algorithm for automatically shutting down a robot in response to a collision (or some other violent event).

September 21, 2017 by Robert Keim

How to Build a Tachometer/Speedometer with an Optoelectronic Sensor, a Microcontroller, and a Disc

Learn how to make a tachometer and speedometer using a C8051 microcontroller, an optoelectronic sensor, and a spinning disc.

September 06, 2017 by Nick Davis

Make a Web Server with ESP8266

In this project, we first examine how to install an ESP8266 add-on on Arduino IDE and then we make a configurable web server with an ESP8266 and show the simplicity of this process.

July 05, 2017 by Mohammad Amin Karami

Build an IoT Notification Device with an Arduino UNO

Enter the world of the Internet of Things by building your own IoT notification device.

June 23, 2017 by Don Wilcher

Build an Arduino Multi-Node BLE Humidity and Temperature Sensor Monitor

Use Cypress Solar-Powered BLE Sensors, an Arduino UNO, and an HM10 BLE module to make your own multi-node temperature and humidity monitor and display.

April 28, 2017 by Raymond Genovese

Creating a Simple Data Logger with the RIOT (Realtime Internet of Things) Framework

In this project, we will demonstrate the simplicity of RIOT by creating a data logger that will plot levels of light onto a graph on a PC server application.

March 08, 2017 by Robin Mitchell

The Punxsutawney 5000! A Sensirion Temperature Device

No more waiting around for the groundhog. The Punxsutawney 5000 is here to keep you inside until springtime arrives!

February 27, 2017 by Ryan Jones

Controlling a Stepper Motor with an SIRC Transmitter and Receiver

Detecting, decoding, and displaying IR (Infrared) signal data is interesting, but using those signals to control stuff is more interesting . . . and sometimes useful. Read on to learn how.

February 22, 2017 by Charles R. Hampton

The IoT Beaglebone Beagle Treat-Feeder

The Beaglebone Treat-Feeder is the prototype for a great pet-feeding device! Keep track of your pet's diet while you stuff your face!

January 30, 2017 by Ryan Jones

Building an Infrared Tracker with a PICAXE 14M2 and a Stepper Motor

Tracking an infrared light source is not as difficult as you might think; a 14-pin PICAXE, a stepper motor with a driver IC, three phototransistors, and a few other components will do the trick.

January 17, 2017 by Charles R. Hampton