Connect with us
NEW INDUSTRY PRODUCTS
CIRCUITS & PROJECTS
EMBEDDED & MICRO
Test Equipment DB
LOG IN / JOIN
Sign in with
Sign in with
Test & Measurement
Feeling Flashy? Tone It Down with the Gentleman Maker’s Raspberry Pi Colorboringizer
In this episode of the Gentleman Maker, we'll use a Raspberry Pi 3 Model B, an Arduino Nano, and an Arduino Uno to create a handy system to rid ourselves of overly-colorful fashion choices....
July 05, 2018
A Simple, Compact Power Supply for Analog and Mixed-Signal Systems
This project demonstrates and discusses the performance and functionality of an inductorless ±5 V power-supply circuit.
June 18, 2018
Hardware Evaluation of a Custom Programmable Wi-Fi Controller: The WiCard
This article explores the schematic design and basic features of a smart programmable wireless controller module I designed: the WiCard.
June 01, 2018
M. Mahdi K. Kanan
Save for Your Own Royal Wedding (of Sorts) with the Gentleman Maker’s Savings Incentivizer
In this project, we'll use a Raspberry Pi to create a responsive piggy bank that belittles you when you slack on your savings!
May 10, 2018
The Gentleman Maker’s Sun Informer Lets Homebodies Safely Enjoy Intermittent Sunshine
In this project, we will create the Sun Informer, a device that will alert us when the sun comes out and then alert us when we have been out for too long....
April 26, 2018
How to Add Bluetooth 5 to a Project with a GT-tronics BLE5 Module
This article demonstrates a solderless-breadboard compatible carrier-board for a pre-certified BLE4 or BLE5 module made by GT-Tronics. Use it to experiment with your own BLE5 compatible...
April 04, 2018
How to Make an IoT Teapot | The Gentleman Maker
No longer will you have to get off the couch or out of your warm bed to get the pot brewed!
February 28, 2018
Power over Ethernet (PoE) with Microchip’s EoE!
Embrace the power of Power over Ethernet with Microchip's Ethernet of Everything!
January 26, 2018
How to Check and Calibrate a Humidity Sensor
How accurate is your humidity sensor? Find out with this project.
November 29, 2017
The Wi-Fi Eye, Part 2: Firmware, Wiring, and Network Connection
Part two of building a device that can detect Wi-Fi signals and "react" accordingly.
July 26, 2017
The Wi-Fi Eye, Part 1: Introduction, Features, and Materials
Building an animatronic, wearable, Wi-Fi robots, part 1: Programming the controller.
July 25, 2017
Troubleshooting Tools for Your Next Bluetooth LE Project: Ubertooth and the Nordic nRF Sniffer
Bluetooth LE was designed with the IoT in mind. Here are some options for troubleshooting your next Bluetooth LE project.
July 14, 2017
Make a Web Server with ESP8266
In this project, we first examine how to install an ESP8266 add-on on Arduino IDE and then we make a configurable web server with an ESP8266 and show the simplicity of this process....
July 05, 2017
Mohammad Amin Karami
Build an IoT Notification Device
Enter the world of the Internet of Things by building your own IoT notification device.
June 23, 2017
Build a Soil Moisture Sensor with the ADICUP Evaluation Board from Analog Devices
With all this hot weather this summer, we need to keep our plants well-fed. That's where the Debra 2 Moisture Sensor comes in!
June 15, 2017
Build an Arduino Multi-Node BLE Humidity and Temperature Sensor Monitor
Use Cypress Solar-Powered BLE Sensors, an Arduino UNO, and an HM10 BLE module to make your own multi-node temperature and humidity monitor and display....
April 28, 2017
How to Flash ESP-01 Firmware to the Improved SDK v2.0.0
Learn about SKD v2.0.0 and how flashing your ESP-01's firmware just got easier.
March 17, 2017
Charles R. Hampton
Creating a Simple Data Logger with the RIOT (Realtime Internet of Things) Framework
In this project, we will demonstrate the simplicity of RIOT by creating a data logger that will plot levels of light onto a graph on a PC server application....
March 08, 2017
Using a SIM900A to Send Sensor Data to a Website
In this article, I'll show you how I used one of my SIM900A GSM modules to send temperature and relative humidity to my personal website....
February 23, 2017
Testing a Custom IoT Framework by Controlling an LED: RIOT (RealTime Internet of Things)
Using a custom framework (RIOT) to control an LED with a networked computer.
February 08, 2017
Page 1 of 3
Next Page →
Continue to site