Or try an example search: 8 bit multiplier
Feature: • 8/16/32 Configurable SDRAM data width • Wish Bone compatible • Application clock and SDRAM clock can be async •…
This IP core is that of a small, simple SDRAM controller used to provide a 32-bit pipelined Wishbone interface to a 16-bit SDRAM chip. When…
SUPERSEDED BY HPDMC. Please do not ask me about this core! It is old and totally unsupported. HPDMC support, however, is available from the…
This module implements a synchronous FIFO using Block RAM resources such as those found in SRAM-based FPGAs. This module has been used in several…
CFI flash controller IP. Provides two modes of operation - simple (Wishbone bus straight through to flash bus, essentially, but with 32-bit word…
This is a controller core for DDR3 SDRAM. Default configuration supports one 64 bit UDIMM or SO-DIMM Supports DIMM sizes of 1GB, 2GB, 4GB and 8GB…
n/a
This project is to develop a direct mapped cache controller for embedded applications. Key Design Features - Direct mapped with configurable…
This project provides a parameterizable synchronous FIFO which uses LUTs instead of Block RAMs for its memory. The FIFO can be parameterized in…
HPDMC is part of the Milkymist System-on-Chip, the most advanced open source SoC for interactive multimedia applications. Fast DDR SDRAM controller…
Two WISHBONE wrappers will be developed for Xilinx Memory Interface Generator (MIG). The first is compliant with version B4 Registered Feedback…
Generic, multi-purpose FIFOs. Available as single clock and dual clock version, binary, lfsr, and gray encoded (dual clock only). All are…
openHMC is an open-source project developed by the Computer Architecture Group (CAG) at the University of Heidelberg in Germany. It is a…
Open FreeList Readme General Description The Open FreeList module is used to manage a set of variable sized packets inside a fixed memory block.…
Overview This is a modular memory controller supporting different types of memories. Initial design will have support for SDR SDRAM. Upcoming…
The FIFO implementation outlined in this document can easily be configured to suit the following asynchronous FIFO with different clock domains for…
This project provides a bridge between asynchronous external memory interfaces found on many processors and a WishBone bus. It is being used on the…
The purpose of this core is to provide a GPL wishbone core capable of commanding a DDR3 memory, such as the one used on Digilent's Arty board,…
Overview This IP provides a 8-bit or 16-bit bridge for a 32-bit WishBone interface. There is no buffering. The 32-bit transaction is delayed until…
This is a wishbone B3 compliant RAM memory. The memory array is defined as a 32 bit memory. This gives two valuable benefits. First. memory array…