Latest Amplifiers Projects

Invoke the power of the PID (proportional–integral–derivative controller)! The key components in this design are an…

Invoke the power of the PID (proportional–integral–derivative controller)! The key components in this design are an EFM8 microcontroller, a DAC, and the MAX31855 thermocouple-to-digital converter.

This analog design allows your LEDs to respond to your music. Just plug your music source into this which sends a channel…

This analog design allows your LEDs to respond to your music. Just plug your music source into this which sends a channel to your sound system and some LEDs.

Use a laser and a photo resistor to build a laser based point-to-point communication system. The best part? It's under $10.

Use a laser and a photo resistor to build a laser based point-to-point communication system. The best part? It's under $10.

Is IDT’s Tx/Rx wireless power solution suitable for applications that require high-precision analog performance?

Is IDT’s Tx/Rx wireless power solution suitable for applications that require high-precision analog performance?

Part 2 in the “How to Make an EFM8-Based Sound Synthesizer” series.

Part 2 in the “How to Make an EFM8-Based Sound Synthesizer” series.

Part 3 in the “How to Make an Ambient Light Monitor” series. The project continues by building an ambient light…

Part 3 in the “How to Make an Ambient Light Monitor” series. The project continues by building an ambient light sensor circuit on a breadboard, digitizing the circuit’s output signals, and interpreting the digitized measurements.

Introduction to the Arduino SPI Library with example sketch for the LTC1286 12 Bit ADC and the DAC714 16 bit DAC.

Introduction to the Arduino SPI Library with example sketch for the LTC1286 12 Bit ADC and the DAC714 16 bit DAC.

Build an analog booby-trap alarm system with an LM386 amplifier and an NPN transistor. This alarm system is activated by…

Build an analog booby-trap alarm system with an LM386 amplifier and an NPN transistor. This alarm system is activated by a trip sensor that sets off a screeching noise, alerting everyone and scaring off thieves.