Latest Digital Multimeters Industry White Papers

Categories

Four Secrets to Mastering Millimeter-Wave Communications Circuit Design

Learn four EDA secrets to mastering mmWave communications circuit design and how to streamline your design workflow to achieve first-pass success.

November 16, 2021 by Keysight Technologies

New Asterion® DC ASA Series: The Next Evolution in Programmable Power

Learn about these autoranging power supplies that enable the ability to satisfy a wider testing need without requiring the purchase of additional models.

November 04, 2021 by AMETEK Programmable Power

Debugging Conducted Emissions with Oscilloscopes Made Easy

Learn how to transform oscilloscopes into powerful EMI measurement tools to save time and make it more likely that EMI compliance can be achieved without having to be redesigned.

October 26, 2021 by Rohde & Schwarz

4 Tips For Integrating and Using an ATE System Power Supply

Follow these four expert tips to integrate and use your system power supply successfully.

October 14, 2021 by Keysight Technologies

How to Measure and Reduce Common Mode EMI in Electric Drive Installations

Discover a simple and reliable way to accurately measure and reduce common mode EMI in electric drive installations.

October 05, 2021 by Rohde & Schwarz

Improving T/R Module Test Accuracy and Throughput

Phased arrays have been used in radar applications for many decades. Recent trends are driving their adoption into other applications such as electronic warfare (EW), satellite systems and even 5G communications.

October 01, 2021 by Rohde & Schwarz

Over-the-Air RF Conformance Measurements on 5G NR Devices

Learn more about the technical background for over-the-air (OTA) testing.

August 25, 2021 by Rohde & Schwarz

High Rate Pulse Ultra-Wideband (UWB) Physical Layer Test and Certification

Get an overview of UWB physical layer fundamentals, the associated test requirements and appropriate test solutions.

August 25, 2021 by Rohde & Schwarz

EMI Debugging with Oscilloscopes

A simple guideline to help hardware developers analyze EMI problems using near-field probes in conjunction with digital oscilloscopes.

August 25, 2021 by Rohde & Schwarz

IoT Regulatory Compliance

Discover deep insights into regulatory compliance tests, why it is important, its test challenges, and the solutions to overcome these obstacles.

July 15, 2021 by Keysight Technologies

Verification Methods of Snubber Circuits in Flyback Converters

Explore verification methods during the design phase of snubber circuits in flyback converters.

July 08, 2021 by Rohde & Schwarz

Improving 5G Millimeter-Wave Signal Analysis Accuracy

Explore these expert tips from Keysight engineers for your top 5G mmWave test challenges.

July 02, 2021 by Keysight Technologies

5G Voice Over New Radio (VoNR)

In-depth guidance for navigating 5G VoNR in terms of the network deployment and connectivity options to support voice over NR and enable the relevant VoNR data services.

June 24, 2021 by Rohde & Schwarz

Tackling Millimeter-Wave Signal Analysis Challenges

Overcome challenges in path loss, design margins, and modulation facing millimeter-wave technologies.

June 21, 2021 by Keysight Technologies

Automated ADAS Test System Trial with Radar Sensors and Electromagnetic Interference

Since radars are critical to vehicles, manufacturers need to ensure that they do not malfunction or become non-responsive in critical situations. Stringent EMS testing in line with ISO11451-2 is carried out for vehicle level testing. However, one of the key challenges is replicating real life scenarios where the ADAS car radar functions are activated during EMS testing.

May 27, 2021 by Rohde & Schwarz

Gate Drive Measurement Considerations

This white paper provides guidelines for choosing the right probe and optimizing the probing technique for gate driver measurement.

May 13, 2021 by Rohde & Schwarz

Battery Simulation with DC Power Supply R&S®NGM200

This application note is about creating your own battery model for the R&S®NGM200, beyond the standard models provided within the battery simulation option NGM-K106.

May 06, 2021 by Rohde & Schwarz

Power Integrity - Pocket eGuide

Clean and stable power rail voltages are the basis for proper performance of any electronic design. The continuing demand for higher performance, higher level of integration and lower power consumption drives supply voltages down, making voltage tolerances tighter and power rail qualification a challenging task.

May 06, 2021 by Rohde & Schwarz

dB or not dB? Everything You Ever Wanted to Know About Decibels But Were Afraid to Ask…

%, dB, dBm and dB (µV/m) are important concepts that every engineer should understand in his (or her) sleep. Because if he does not, he is bound to be at a disadvantage in his work.

May 06, 2021 by Rohde & Schwarz

Understanding and Selecting Power Sensors

A power sensor is a fundamental measurement tool in RF engineering. However, today's marketplace is filled with myriad choices, and many are making bold claims about attributes such as measurement speed and readings per second.

April 13, 2021 by Rohde & Schwarz