Latest Oscillators Industry White Papers

Understanding Voltage Controlled Oscillators

Get a short technical introduction to voltage controlled oscillators.

Understanding Phase Noise Measurement Techniques

Phase noise can be measured using traditional spectrum analyzers as well as dedicated phase noise analyzers. Explore the difference between these two methodologies and in particular, how the cross-correlation method improves both the sensitivity and accuracy of phase noise measurements.

High-Side SmartFETs with Analog Current Sense

This application note describes the structure and design philosophy of onsemi High-Side SmartFETs, and provides specific examples and numerical calculations of how to apply SmartFETs with analog current sense into your system to achieve the optimal switching performance.

Using Physical and Scalable Simulation Models to Evaluate Parameters and Application Results

Learn how physical and scalable models can help a designer analyze components characteristics and optimize application performances.

Polyimide Film Uses for Digital Isolators

In this article, learn about digital isolator construction using polyimide films as isolation layers.

Battery Stack Monitor Maximizes Performance of Li-Ion Batteries in Hybrid and Electric Vehicles

This white paper explores the ways a battery stack monitor can maximize performance of Li-Ion batteries in hybrid and electric vehicles.

CTSD Precision ADCs: CTSD Architecture Explained for Signal Chain Designers

Explore this step-by-step approach to building a CTSD modulator loop starting with the widely known closed-loop inverting amplifier configuration and combining it with an ADC and a DAC.

Improving Power Supply Design Using Semi-Automation—Five Steps to Quick and Efficient Design

Explore semi-automated design tools through five critical steps of the power supply design process.

LIDAR for Autonomous System Design: Object Classification or Object Detection?

Understand the design requirements for object detection and classification to help achieve a safe and cost-effective solution for autonomous vehicles.

How to Design a Better Pulse Oximeter

Learn the fundamentals of SpO₂ measurement and how a new generation of optical analog front ends (AFEs) can help create a better oximeter.

Verification Methods of Snubber Circuits in Flyback Converters

Explore verification methods during the design phase of snubber circuits in flyback converters.

Integrated Hardened DSP on DAC/ADC ICs Improves Wideband Multichannel Systems

This article presents experimental results utilizing a 16-channel transmit and 16-channel receive subarray.

Emerging Data Converter Architectures and Techniques

This paper discusses several aspects of recent data conversion architectural innovations.

Emerging Automotive In-Cabin Sensing Solutions for Safety and Comfort

Explore the key aspects driving the development of in-cabin sensing technologies.

How to Successfully Calibrate an Open-Loop DAC Signal Chain

The monitoring and testing of a DAC signal chain are critical considerations for open-loop applications. Errors in a DAC signal chain, including DAC intrinsic errors that vary depending on the system, can significantly disrupt the customer design-in experience.

Minimizing Power Consumption

More and more devices are battery powered or need to have low power consumption for other reasons. In order to minimize your electronic device’s power consumption, you need to know the exact current profile. The R&S®NGM200 power supply series provides this information.

Power Consumption Analysis with the Rohde & Schwarz Specialty DC Power Supplies

Teleoperation: Remote Operation of Connected & Autonomous Vehicles