This white paper explains how looking holistically at all elements in the EV power train helps identify opportunities to improve EV and enhance overall power efficiency, leading to a longer EV driving range.
September 21, 2021 by Analog Devices
This white paper explores the link between the ISO 26262 objectives complex implementations. It also takes a further look at how to manage safety in this increasingly complex world.
August 31, 2021 by Siemens Digital Industries Software
This paper outlines the multi-dimensional nature of this complexity and the costs and opportunities it generates. It also demonstrates that the key to designers meeting this challenge is the ability to attain system-level visibility: both during the semiconductor development cycle, and subsequently after embedded systems are deployed in the field.
August 30, 2021 by Siemens Digital Industries Software
This white paper reviews how high-side switches, such as those from Infineon’s PROFET™ portfolio, are driving the next generation of automotive power distribution architectures.
August 27, 2021 by Infineon Technologies
This white paper displays how the Tanner flow simplifies the design and verification process of Analog/Mixed-Signal design. It also describes how the user can verify design functionality, connectivity, and performance at all levels of the design hierarchy and for all integrated circuit (IC) applications.
August 12, 2021 by Siemens Digital Industries Software
This application note focuses on how to measure and analyze FMCW radar signals with up to 6 GHz bandwidth with an R&S® RTP oscilloscope. On-board analysis features for pulse and chirp analysis for single- and multi-channel measurements are addressed, as well as the combination of oscilloscopes and R&S® VSE software. This resource also demonstrates the measurement of an FMCW radar signal in the 77 - 81GHz band with 4 GHz bandwidth.
August 09, 2021 by Rohde & Schwarz
This paper reviews different ways to overcome the challenges of RF measurements in the E band for ultra wide signals. It also looks at the demodulation and analysis of a wideband automotive radar signal and discuss the results and main performance parameters.
August 09, 2021 by Rohde & Schwarz
This white paper walks through the design and review of a wiring harness for a small tractor using VeSys. Solutions like the one discussed in this resource allow vehicle manufacturers to meet the demands of product complexity and quality while going to market faster than ever.
August 05, 2021 by Siemens Digital Industries Software
This white paper explores the changing expectations of OBCs, the semiconductor technologies used and their unique capabilities, and how such designs are tackled using today’s preferred power conversion topologies.
August 03, 2021 by Infineon Technologies
This white paper discusses how the Infineon XENSIV™ ABS wheel speed sensor with high resolution and immediate direction detection enables new use cases such as automated parking, automated trailer connection, and electric engine control while ensuring full compatibility with existing systems and application requirements.
July 16, 2021 by Infineon Technologies
In this whitepaper from Infineon Technologies, learn about the system architecture and possible topologies for on-board charging, as well as the recommendations for the right choice of power semiconductors for OBCs. This whitepaper will take a more in-depth look into onboard charging, discuss the system architecture, and elaborate on the possible topologies for the PFC and the DC-DC stages.
July 08, 2021 by Infineon Technologies
This application note explains the effect of cosmic radiation on HV power semiconductors, describes the influencing factors of the application on the failure rate, and gives concrete results of robustness validation based on a generic mission profile for a bi-directional onboard-charger (OBC).
July 06, 2021 by Infineon Technologies
This white paper provides a breakdown of the wide range of features and regenerative electronic loads from EA Elektro-Automatik that help simplify the test procedure for users. This resource also explains the benefits of a built-in waveform generator, true autoranging, efficient mains feedback and the EA Power Control software.
June 28, 2021 by EA Elektro-Automatik