In this whitepaper from Infineon Technologies, learn about the system architecture and possible topologies for on-board charging, as well as the recommendations for the right choice of power semiconductors for OBCs. This whitepaper will take a more in-depth look into onboard charging, discuss the system architecture, and elaborate on the possible topologies for the PFC and the DC-DC stages.
July 08, 2021 by Infineon Technologies
This application note explains the effect of cosmic radiation on HV power semiconductors, describes the influencing factors of the application on the failure rate, and gives concrete results of robustness validation based on a generic mission profile for a bi-directional onboard-charger (OBC).
July 06, 2021 by Infineon Technologies
In this application note, a DC electronic load is used to provide a current load that steps from a low current draw to a higher value in a short period of time. By directly measuring the voltage and current output of the supply with the stepped load, one can visually observe the recovery of the power supply feedback loop and make changes to the design to optimize the response.
July 02, 2021 by Siglent
The Siglent Bode Plot Ⅱ features to the SIGLENT SDS1104X-E, SDS1204X-E, SDS2000X-E, SDS2000X Plus, and SDS5000X series of oscilloscopes. When combined with a Siglent arbitrary waveform generator (SDG or SAG) and an injection transformer, quick frequency response curves can be created.
July 02, 2021 by Siglent
This white paper describes the basic theory for DC power supply efficiency calculations, presents a physical setup for accurately measuring the important parameters, and provides an example program that coordinates measurements and automatically calculates power supply efficiency quickly.
July 02, 2021 by Siglent
This white paper provides a breakdown of the wide range of features and regenerative electronic loads from EA Elektro-Automatik that help simplify the test procedure for users. This resource also explains the benefits of a built-in waveform generator, true autoranging, efficient mains feedback and the EA Power Control software.
June 28, 2021 by EA Elektro-Automatik
This white paper offers a closer look at the structure and the benefits of Trench Schottky rectifiers. This resource covers topics such as, why Trench rectifiers are typically the correct choice when a better trade-off between forwarding voltage drop and the leakage current is required, why they should also be selected in high power density applications where the ambient temperature is elevated, and what makes them ideal for applications with switching speeds above 100 kHz.
June 07, 2021 by Avnet
This white paper takes a closer look at fast EV charging infrastructure, AC vs. DC charging, charging rates and times, standards and protocols for DC charging, combined charging systems, use cases and configurations, and much more.
May 20, 2021 by ON Semiconductor
