All About Circuits

Latest Wireless/RF Industry White Papers

Categories

A Better Way to Prototype RF Designs, Using X-Microwave

A Better Way to Prototype RF Designs, Using X-Microwave

Prototyping is a headache well known in the RF engineering world—the solution to faster, easier, and more accurate prototypes is X-Microwave.


Improve the Speed and Quality of Bumper and Radome Testing for Automobile Radar Systems

Improve the Speed and Quality of Bumper and Radome Testing for Automobile Radar Systems

Learn how to reduce performance degradation of automotive radar sensors caused by radomes and bumpers when testing in all phases.


Positioning in 5G NR: A Look at the Technology and Related Test Aspects

Positioning in 5G NR: A Look at the Technology and Related Test Aspects

Explore this detailed description of test and measurement methodologies, setups and test procedures, and challenges for 5G NR.


Wireless Control of the R&S®Scope Rider for Increased Operator Safety

Wireless Control of the R&S®Scope Rider for Increased Operator Safety

Learn more about the R&S®ScopeRider, a handheld oscilloscope with a wireless interface for extensive, high-performance remote access.


Satellite-Based Navigation Poster

Satellite-Based Navigation Poster

Get an illustrated overview of satellite-based navigation systems all in one page!


NewSpace Gateway and User Terminal Testing Challenges

NewSpace Gateway and User Terminal Testing Challenges

Learn more about the challenges ground terminals present to design verification testing and manufacturing.


Why Wi-Fi 6 goes hand-in-hand with cellular to enable the hyper-connected enterprise future

Why Wi-Fi 6 goes hand-in-hand with cellular to enable the hyper-connected enterprise future

Wi-Fi 6 is increasingly seen as a complementary to cellular technologies.


Accelerate IoT device time-to-market by combining antennas and modules

Accelerate IoT device time-to-market by combining antennas and modules

Alongside connectivity and power, a third area – the antenna – needs to be given equal attention because of the fundamental impact it has on device performance.


Design with EMI in Mind: Test Early, Test Often

Design with EMI in Mind: Test Early, Test Often

Download this poster to help design with EMI in mind.


Test and Optimize Your SiC Design to Minimize EMI

Test and Optimize Your SiC Design to Minimize EMI

Explore EMI challenges associated with migrating a design from Si to SiC, test tools and test methodology, along with mitigation and optimization techniques.


IEEE 802.11be Technology Introduction

IEEE 802.11be Technology Introduction

In this white paper, Rohde & Schwarz experts focus on explaining the technologies that enable the Wi-Fi 7, and the test and measurement challenges as well as relevant, leading-edge solutions.


EMC Standards - Overview 5.0

EMC Standards - Overview 5.0

The number of EMC standards published is steadily increasing. In this white paper by Rohde & Schwarz, explore basic standards, generic standards, and product/product family standards.


Over-the-Air RF Conformance Measurements on 5G NR Devices

Over-the-Air RF Conformance Measurements on 5G NR Devices

Learn more about the technical background for over-the-air (OTA) testing on 5G NR devices.


Power Consumption Analysis Tool

Power Consumption Analysis Tool

The power consumption analysis tool was developed to make it easier for customers to analyze power consumption data collected with either the NGL, NGM or NGU power supplies from Rohde & Schwarz. This application note explores the prerequisites needed, interfaces, settings, order information, and more. 


Receiver Testing: Why Test Signal Quality Matters

Receiver Testing: Why Test Signal Quality Matters

This educational note provides performance parameters to consider when evaluating signal generators for your receiver testing. This will ensure that the signal generator provides a level of performance that has minimal effect on your receiver measurements.


Understanding Phase Noise Fundamentals

Understanding Phase Noise Fundamentals

This white paper provides a brief technical introduction to phase noise concepts as well as an overview of how phase noise is measured and reported.


Improving the Capabilities of Cognitive Radar and EW Systems

Improving the Capabilities of Cognitive Radar and EW Systems

Unveil the challenges that mode-agile radar and EW threat emitters pose to traditional static threat library implementations in radar and EW systems, and consider the architecture of cognitive artificial intelligence (AI) and machine learning (ML) systems that can be used to deliver effective RF countermeasures. This whitepaper also explains how a wideband RF record, simulation and playback system can be used to train the AI/ML engines, and evaluates the responses and effectiveness of those countermeasures on real hardware.


Emerging Trends in Wireless Infrastructure

Emerging Trends in Wireless Infrastructure

5G is a transformational technology designed to provide significant flexibility and support for a variety of use cases. In this white paper, we describe the emerging infrastructure trends of wireless networks for 4G, 5G, and beyond 5G.


Radar & Electronic Warfare Pocket Guide

Radar & Electronic Warfare Pocket Guide

Download this pocket guide and get an illustrated collection of definitions and formulas on the subject of radar and electronic warfare.


IoT Design Guide – Antenna Design, Measurement and Optimization

IoT Design Guide – Antenna Design, Measurement and Optimization

IoT applications using wireless networks rely on the performance of wireless interfaces. Our eGuide helps you select, integrate and optimize the most suitable antenna for optimal performance. It will also highlight factors affecting antenna performance, from coverage and range to noise and interference – and much more.