All About Circuits

Latest Wireless/RF Industry White Papers

Categories

Poster: Spectrum Allocation

Poster: Spectrum Allocation

The national and international spectrum usage has continued to undergo a constant cadence of change. These changes necessitate the need to continue to evolve your awareness of valuable spectrum allocation information. As evidenced recently in the U.S.: Analog TV has mostly gone quiet and replaced with Digital TV; the LORAN-C navigation system has been shut down; new GPS satellites and frequencies provide coverage to Smartphones; and the National Wireless Initiative is looking to actively refarm and commercialize over 500 MHz of spectrum for commercial high-speed wireless services.


Poster: UWB for Enhanced Ranging Devices

Poster: UWB for Enhanced Ranging Devices

Examine important UWB details like the physical layer, modulation schemes, positioning techniques and more.


Combining the Key Capabilities of Bluetooth LE to Make the Future of Audio a Reality

Combining the Key Capabilities of Bluetooth LE to Make the Future of Audio a Reality

Bluetooth LE Audio includes next-generation capabilities that significantly extend possibilities in the wireless audio market.


In-Cabin Radar for Child Protection

In-Cabin Radar for Child Protection

Review a new technology that is focused on in-cabin detection using radar to prevent injury to children.


Understanding Phase Noise Measurement Techniques

Understanding Phase Noise Measurement Techniques

Phase noise can be measured using traditional spectrum analyzers as well as dedicated phase noise analyzers. Explore the difference between these two methodologies and in particular, how the cross-correlation method improves both the sensitivity and accuracy of phase noise measurements.


How Vibration Sensors are Transforming Industrial Maintenance

How Vibration Sensors are Transforming Industrial Maintenance

Learn more about sensor and connectivity technologies, which need to be identified before choosing a suitable architecture for a predictive maintenance system.


A Better Way to Prototype RF Designs, Using X-Microwave

A Better Way to Prototype RF Designs, Using X-Microwave

Prototyping is a headache well known in the RF engineering world—the solution to faster, easier, and more accurate prototypes is X-Microwave.


Improve the Speed and Quality of Bumper and Radome Testing for Automobile Radar Systems

Improve the Speed and Quality of Bumper and Radome Testing for Automobile Radar Systems

Learn how to reduce performance degradation of automotive radar sensors caused by radomes and bumpers when testing in all phases.


Positioning in 5G NR: A Look at the Technology and Related Test Aspects

Positioning in 5G NR: A Look at the Technology and Related Test Aspects

Explore this detailed description of test and measurement methodologies, setups and test procedures, and challenges for 5G NR.


Wireless Control of the R&S®Scope Rider for Increased Operator Safety

Wireless Control of the R&S®Scope Rider for Increased Operator Safety

Learn more about the R&S®ScopeRider, a handheld oscilloscope with a wireless interface for extensive, high-performance remote access.


Satellite-Based Navigation Poster

Satellite-Based Navigation Poster

Get an illustrated overview of satellite-based navigation systems all in one page!


NewSpace Gateway and User Terminal Testing Challenges

NewSpace Gateway and User Terminal Testing Challenges

Learn more about the challenges ground terminals present to design verification testing and manufacturing.


Why Wi-Fi 6 goes hand-in-hand with cellular to enable the hyper-connected enterprise future

Why Wi-Fi 6 goes hand-in-hand with cellular to enable the hyper-connected enterprise future

Wi-Fi 6 is increasingly seen as a complementary to cellular technologies.


Accelerate IoT device time-to-market by combining antennas and modules

Accelerate IoT device time-to-market by combining antennas and modules

Alongside connectivity and power, a third area – the antenna – needs to be given equal attention because of the fundamental impact it has on device performance.


Design with EMI in Mind: Test Early, Test Often

Design with EMI in Mind: Test Early, Test Often

Download this poster to help design with EMI in mind.


Test and Optimize Your SiC Design to Minimize EMI

Test and Optimize Your SiC Design to Minimize EMI

Explore EMI challenges associated with migrating a design from Si to SiC, test tools and test methodology, along with mitigation and optimization techniques.


IEEE 802.11be Technology Introduction

IEEE 802.11be Technology Introduction

In this white paper, Rohde & Schwarz experts focus on explaining the technologies that enable the Wi-Fi 7, and the test and measurement challenges as well as relevant, leading-edge solutions.


EMC Standards - Overview 5.0

EMC Standards - Overview 5.0

The number of EMC standards published is steadily increasing. In this white paper by Rohde & Schwarz, explore basic standards, generic standards, and product/product family standards.


Over-the-Air RF Conformance Measurements on 5G NR Devices

Over-the-Air RF Conformance Measurements on 5G NR Devices

Learn more about the technical background for over-the-air (OTA) testing on 5G NR devices.


Power Consumption Analysis Tool

Power Consumption Analysis Tool

The power consumption analysis tool was developed to make it easier for customers to analyze power consumption data collected with either the NGL, NGM or NGU power supplies from Rohde & Schwarz. This application note explores the prerequisites needed, interfaces, settings, order information, and more.