In this whitepaper from Infineon Technologies, learn about the system architecture and possible topologies for on-board charging, as well as the recommendations for the right choice of power semiconductors for OBCs. This whitepaper will take a more in-depth look into onboard charging, discuss the system architecture, and elaborate on the possible topologies for the PFC and the DC-DC stages.
July 08, 2021 by Infineon Technologies
This application note explains the effect of cosmic radiation on HV power semiconductors, describes the influencing factors of the application on the failure rate, and gives concrete results of robustness validation based on a generic mission profile for a bi-directional onboard-charger (OBC).
July 06, 2021 by Infineon Technologies
In this application note, a DC electronic load is used to provide a current load that steps from a low current draw to a higher value in a short period of time. By directly measuring the voltage and current output of the supply with the stepped load, one can visually observe the recovery of the power supply feedback loop and make changes to the design to optimize the response.
July 02, 2021 by Siglent
The Siglent Bode Plot Ⅱ features to the SIGLENT SDS1104X-E, SDS1204X-E, SDS2000X-E, SDS2000X Plus, and SDS5000X series of oscilloscopes. When combined with a Siglent arbitrary waveform generator (SDG or SAG) and an injection transformer, quick frequency response curves can be created.
July 02, 2021 by Siglent
This white paper describes the basic theory for DC power supply efficiency calculations, presents a physical setup for accurately measuring the important parameters, and provides an example program that coordinates measurements and automatically calculates power supply efficiency quickly.
July 02, 2021 by Siglent
This white paper provides a breakdown of the wide range of features and regenerative electronic loads from EA Elektro-Automatik that help simplify the test procedure for users. This resource also explains the benefits of a built-in waveform generator, true autoranging, efficient mains feedback and the EA Power Control software.
June 28, 2021 by EA Elektro-Automatik
Building blocks of modern embedded systems, including processors, SoCs, system DRAM, non-volatile memories, sensors, and connectivity modules, have varied power requirements. On one extreme, a system power management IC (PMIC) integrates all or almost all of the required power rails. On the other hand, individual power rails are implemented using discrete dc/dc and LDOs.
June 22, 2021 by ROHM Semiconductor
This whitepaper dives into the qualities and features of ROHM's latest musical IC ― the MUSIC™ BD34301EKV, a high-resolution audio digital-to-analog converter (DAC). This component, along with an array of others (including a high-fidelity power supply and sound processor), offers the basic building blocks of a Hi-Fi audio device.
June 22, 2021 by ROHM Semiconductor
This use case from TAIYO YUDEN examines the new communication technologies for today's "Computers on Wheels," the role of RF filtering in automotive TCUs, and the solutions TAIYO YUDEN offers for automotive communications.
June 18, 2021 by TAIYO YUDEN
This use case from TAIYO YUDEN takes a closer look at how small cell base stations aid faster 5G adoption, the role of RF filtering in 5G wireless connectivity, and how TAIYO YUDEN solutions help provide seamless connectivity in 5G applications.
June 18, 2021 by TAIYO YUDEN
