Latest Firmware Articles and Videos

Categories

Was 2020 the Year of Edge AI Compute?

In 2020, many companies released flagship low-power devices with the goal of bringing AI to the edge. We’ll review some of the most recent ones and see how they compare.

December 28, 2020 by Jake Hertz

Factors Suppliers Consider Before Sending a Memory Device to Space

Despite the pandemic, 2020 was a monumental year for space exploration. And pivotal to each mission's success at the circuit level was radiation-hardened memory devices.

December 21, 2020 by Tyler Charboneau

JTAG Implementation in Arm Core Devices

This article will teach you about the intersection between JTAG and Arm core devices, with special attention paid to the Arm Debug Interface or ADI.

December 14, 2020 by Sam Gallagher

2020 Chip Market Year in Review: DRAM Comes Out on Top

According to IC Insights, DRAM was the biggest IC product category for 2020 with sales of $65.2 billion, followed by NAND coming in second at $55.2 billion.

December 10, 2020 by Luke James

FPGAs and Firmware: An Ironclad Security Duo at Every Stage of Design and Manufacture

With increased data transfer comes increased hardware security. We sat down with Lattice Semiconductor to discuss a new security-focused FPGA that may be a solution to many firmware vulnerabilities.

December 08, 2020 by Jake Hertz

Understanding Digital Filtering with Embedded Microcontrollers

Learn about the widely used methods for filtering and processing data samples in the time domain while taking a closer look at the Dual Biquad IIR engine of the PowerQuad unit in the LPC55S69 MCU. 

December 03, 2020 by Eli Hughes, NXP Semiconductors

Improving Home Appliance Safety with IEC Standards

This article explores the IEC 60730 Class B standard for functional safety to address both mechanical and electrical design in appliances. Learn what the standard entails and controllers to help meet these standards.

December 01, 2020 by Chad Solomon, Microchip Technology

Finding the Right IDE for Your Application

If you're not sure which IDE to choose, here's a good place to start.

November 25, 2020 by Jake Hertz

JTAG Connectors and Interfaces

Learn about the interfaces and connectors used to implement JTAG.

November 23, 2020 by Sam Gallagher

The JTAG Test Access Port (TAP) State Machine

In this article, we’re going to look at the test access state machine in detail and even see some pseudocode for a simple JTAG interface.

November 20, 2020 by Sam Gallagher

Introduction to JTAG and the Test Access Port (TAP)

In this article, we’re going to be talking about JTAG, the ubiquitous hardware tool used for testing, programming, and debugging.

November 18, 2020 by Sam Gallagher

Security IC Solutions: Build or Buy?

Depending on the project, designers have a number of options to either etch security at the silicon level or buy a pre-fabricated and pre-programmed security IC.

November 13, 2020 by Antonio Anzaldua Jr.

Newly-Announced $3.4 Billion Plan Aims to Stimulate US Semiconductor R&D

The SIA and the Semiconductor Research Corporation have released a preview of an upcoming report that outlines the next decade’s chip research and funding priorities.

November 04, 2020 by Luke James

Non-Volatile Memory Surges Ahead as Arm Spin-Off Develops CeRAM and FeFETs

This week, Arm announced that it will transfer its entire CeRAM IP portfolio to a new spin-out from the company, Cerfe Labs, while taking minority ownership stake in the new company.

October 08, 2020 by Jake Hertz

Xilinx Hardware Accelerators Link Up With O-RAN to Push 5G Server Performance

Hardware acceleration is said to create a new 5G throughput reality with 42x encoding and 24x decoding improvements for FEC and HARQ line coding.

September 21, 2020 by Adrian Gibbons

Protecting IoT Embedded Designs with Security ICs

In this article, we discuss some key security threats to be aware of when designing for the IoT, important security functions, and how protecting these designs is becoming easier with advances in security ICs. 

September 15, 2020 by Scott Jones, Maxim Integrated

How to Enable I2C on the OKdo E1 Board Using the NXP MCUXpresso IDE

In this article, learn how to enable I2C by allowing the LPC55S69 MCU on the E1 board to communicate with a Bosch BME280 environmental sensor present on the Microe Weather click module.

September 10, 2020 by Mark Dunnett, on Behalf of NXP

NXP Bets on Neural Network Compiler Glow to Push ML to Edge Devices

Glow, the open-source neural network compiler, stirred conversation during the Q&A portion of NXP's Industry Tech Days presentation. Why is this compiler so important for pushing intelligence to the edge?

September 04, 2020 by Hannah DeTavis

Is Stereovision the Key to Fully-Autonomous Vehicles?

Advanced driving-assistance systems have been evolving technology for the past few years. The next evolution of processing technology—stereovision—is pushing ADAS into the future.

August 24, 2020 by Adrian Gibbons

Using a Supervisory Circuit to Turn a Conventional SRAM into Fast Non-Volatile Memory

How can you build a fast non-volatile memory from a conventional SRAM? It turns out, you only need a back-up battery and some control circuitry.

August 21, 2020 by Steve Arar