Nanopower Semiconductor’s power-saving IC manages sensors and peripherals while keeping the host MCU off, with an idle current of just 200 nA.
Nanopower Semiconductor’s power-saving IC manages sensors and peripherals while keeping the host MCU off, with an idle current of just 200 nA.
Nexperia NCA9548A 8-Channel I²C Bus Switches provide a simple, flexible way to expand I²C bus capacity and manage…
Nexperia NCA9548A 8-Channel I²C Bus Switches provide a simple, flexible way to expand I²C bus capacity and manage multiple devices without address conflicts. Watch and learn all about their features, specs, applications, and more!
Scaling down RF circuit footprints requires balancing board space against critical trade-offs. Discover how loading…
Scaling down RF circuit footprints requires balancing board space against critical trade-offs. Discover how loading methods and high-dielectric substrates impact Q factor and insertion loss.
The PMF2002 multiplexes 12 customer-functionalized graphene sensing channels on one device, while the new Enterprise…
The PMF2002 multiplexes 12 customer-functionalized graphene sensing channels on one device, while the new Enterprise Reader adds direct electronic readout and real-time analysis.
Discover how the LT1079 quad op-amp minimizes sensor loading in battery-powered designs. Active cancellation and an…
Discover how the LT1079 quad op-amp minimizes sensor loading in battery-powered designs. Active cancellation and an onboard bridge network ensure maximum precision for resistive sensors.
The new PolarFire FPGA-powered board from Microchip brings multiple sensors to Nvidia edge AI platforms.
The new PolarFire FPGA-powered board from Microchip brings multiple sensors to Nvidia edge AI platforms.
Papers from École Polytechnique, Seoul National University, and Harvard tackle optical gain, on-chip buffering, and…
Papers from École Polytechnique, Seoul National University, and Harvard tackle optical gain, on-chip buffering, and component footprint.
This project brief describes how to build and use an Arduino-compatible board that reads a linear Hall-effect sensor and…
This project brief describes how to build and use an Arduino-compatible board that reads a linear Hall-effect sensor and reports the measurement over an RS-485 bus.
In this Tech Guide, explore how the onsemi AR0145CS Hyperlux™ SG Image Sensors deliver fast, clear, low-power vision…
In this Tech Guide, explore how the onsemi AR0145CS Hyperlux™ SG Image Sensors deliver fast, clear, low-power vision with global shutter technology, 120 fps performance, and compact design for industrial automation, robotics, drones, AR/VR, and embedded imaging systems. Watch now to get started!
Melexis has added low-pressure variants with analog, LIN, and SENT output options to its Triphibian pressure sensor family.
Melexis has added low-pressure variants with analog, LIN, and SENT output options to its Triphibian pressure sensor family.
New HBM, UFS, NAND, and EEPROM devices span the storage stack.
New HBM, UFS, NAND, and EEPROM devices span the storage stack.
Build a low-noise, 32-bit delta-sigma ADC board designed around the ADS1262. This 10-channel design features integrated…
Build a low-noise, 32-bit delta-sigma ADC board designed around the ADS1262. This 10-channel design features integrated signal conditioning for RTDs, thermocouples, and strain gauges.
With the three new boards, developers can seamlessly integrate complex I2C sensor networks with motor drive systems…
With the three new boards, developers can seamlessly integrate complex I2C sensor networks with motor drive systems without the headaches of chaotic wiring.
The Titanium Edge FPGA family targets constrained edge AI with 50% lower power, compact SiP packages, high-speed MIPI…
The Titanium Edge FPGA family targets constrained edge AI with 50% lower power, compact SiP packages, high-speed MIPI I/O, and robust security/reliability features for intelligent systems.
Learn how to build a constant-bandwidth band-pass filter covering 20 kHz to 60 kHz, with an integrated frequency counter…
Learn how to build a constant-bandwidth band-pass filter covering 20 kHz to 60 kHz, with an integrated frequency counter for precise tuning.
Research teams at EPFL, Harvard, and UC San Diego each reported photonic devices that shrink or repurpose light-based hardware.
Research teams at EPFL, Harvard, and UC San Diego each reported photonic devices that shrink or repurpose light-based hardware.
TE Connectivity Measurement Specialties 85UHP Pressure Sensor is a compact, high-precision sensing solution designed for…
TE Connectivity Measurement Specialties 85UHP Pressure Sensor is a compact, high-precision sensing solution designed for ultra-high purity semiconductor manufacturing environments. Watch and learn all about their features, specs, applications, and more!
Kate Sokolnicki, Global Business Director for Sensing & Safety at Rockwell Automation, discusses the evolution of…
Kate Sokolnicki, Global Business Director for Sensing & Safety at Rockwell Automation, discusses the evolution of industrial sensing and the shift toward data-driven manufacturing.
Edge AI success is limited by memory and power. Fragmented tools cause failures. Learn how a cohesive, full-lifecycle…
Edge AI success is limited by memory and power. Fragmented tools cause failures. Learn how a cohesive, full-lifecycle approach unifying design and deployment is essential for scalable systems.
Littelfuse 59150 Flange-Mounting Reed Sensors deliver reliable magnetic proximity sensing for industrial and commercial…
Littelfuse 59150 Flange-Mounting Reed Sensors deliver reliable magnetic proximity sensing for industrial and commercial applications requiring durable, long-lasting performance. Watch and learn all about their features, specs, applications, and more!
Facebook
Google
GitHub
Linkedin