Replacing radio waves with laser light – ‘Li-Fi’ – could soon be used to boost the speed and reach of communications far beyond the limits promised by 5G.
Replacing radio waves with laser light – ‘Li-Fi’ – could soon be used to boost the speed and reach of communications far beyond the limits promised by 5G.
In this article, we’ll take a look at the analog blocks for implementing the square wave-based synchronous demodulator.
In this article, we’ll take a look at the analog blocks for implementing the square wave-based synchronous demodulator.
This article is the second of a series on microcontroller timers. This article describes a more complex timer called the…
This article is the second of a series on microcontroller timers. This article describes a more complex timer called the PWM or pulse-width modulation timer.
Researchers at MIT have created an RF wall, dubbed “smart wallpaper,” that consists of thousands of miniature RF…
Researchers at MIT have created an RF wall, dubbed “smart wallpaper,” that consists of thousands of miniature RF antennas connected to RF switches.
The THCS251 IC aggregates 37 data signals into two differential pairs for full-duplex communications.
The THCS251 IC aggregates 37 data signals into two differential pairs for full-duplex communications.
The Type 1SJ is designed for ISM bands ranging from 868 MHz to 916 MHz, including those employed in the US, Europe, and Asia.
The Type 1SJ is designed for ISM bands ranging from 868 MHz to 916 MHz, including those employed in the US, Europe, and Asia.
This New Product Brief (NPB) is part of a video series highlighting the features, applications, and technical specs of…
This New Product Brief (NPB) is part of a video series highlighting the features, applications, and technical specs of newly-released products.
The QN9090 and QN9030 are Bluetooth low-energy (BLE) devices that integrate Arm Cortex-M4 CPUs.
The QN9090 and QN9030 are Bluetooth low-energy (BLE) devices that integrate Arm Cortex-M4 CPUs.
The 3-channel device is built to simplify the design of non-contact motion detection products.
The 3-channel device is built to simplify the design of non-contact motion detection products.
Based on familiar COTS devices, these two radiation-hardened devices are designed to facilitate space-based Ethernet connectivity.
Based on familiar COTS devices, these two radiation-hardened devices are designed to facilitate space-based Ethernet connectivity.
This article discusses how the use of three key design methods utilized in optocouplers improves galvanic isolation…
This article discusses how the use of three key design methods utilized in optocouplers improves galvanic isolation performance and presents an accompanying high voltage surge test as proof.
During CES 2020, Google announced new hardware editions and upgrades to the Coral ecosystem, including an Accelerator…
During CES 2020, Google announced new hardware editions and upgrades to the Coral ecosystem, including an Accelerator Module, the Dev Board Mini, and a System-on-Module.
SenslinQ combines integrated software with sensors, Arm- or RISC-V-based MCUs, Ceva's DSP units, and other connected…
SenslinQ combines integrated software with sensors, Arm- or RISC-V-based MCUs, Ceva's DSP units, and other connected technologies for contextually-aware IoT devices.
This article highlights a few recent products that aim to meet the engineering pain points for harsh environments,…
This article highlights a few recent products that aim to meet the engineering pain points for harsh environments, including processing, power usage, size, and weight.
The KU1500 is designed to allow radios to send and receive signals at the same time on the same or adjacent channels.
The KU1500 is designed to allow radios to send and receive signals at the same time on the same or adjacent channels.
In this article, we will see how we can determine the SFDR for an ADC used in a radio receiver. Also, we’ll examine the…
In this article, we will see how we can determine the SFDR for an ADC used in a radio receiver. Also, we’ll examine the ADC SNR requirement for this application.
The module is housed in a 7.5mm × 9.5mm × 1.5mm package and supports Thread and Zigbee.
The module is housed in a 7.5mm × 9.5mm × 1.5mm package and supports Thread and Zigbee.
The JODY-W2 series features dual-band Wi-Fi 2.4GHz and 5GHz 802.11a/b/g/n/ac and dual-mode Bluetooth 5.
The JODY-W2 series features dual-band Wi-Fi 2.4GHz and 5GHz 802.11a/b/g/n/ac and dual-mode Bluetooth 5.
In this article, we’ll look at the spurious free dynamic range (SFDR) which is a popular specification for quantifying…
In this article, we’ll look at the spurious free dynamic range (SFDR) which is a popular specification for quantifying the linearity of a circuit.
The three companies ally their unique capabilities to build a new network security system.
The three companies ally their unique capabilities to build a new network security system.
Facebook
Google
GitHub
Linkedin