Latest Drivers News

Categories

Menlo Micro Supports Low–power MEMS With High-voltage Driver IC

Created for MEMS applications where high voltages are needed, the company’s new driver IC features an embedded charge pump.

January 17, 2023 by Jake Hertz

A Wave of SiC MOSFET Designs Power Up to Strike at High Voltage Applications

As industrial power electronics move towards higher operating frequencies and voltage, silicon carbide (SiC) technologies are emerging to meet the demands of next-generation power electronics.

February 24, 2022 by Darshil Patel

TI Lowers the Acoustics with BLDC Motor Drivers Leveraging Two Control Schemes

Distracted by the noise caused by the many appliances in your home? TI’s newest BLDC motor drivers claim to quiet appliances by up to 3.3 dBA using trapezoidal and field-oriented control.

September 08, 2021 by Adrian Gibbons

Simplifying Power IC Designs: 3 Companies Tackle Power Conversion Systems

Simplifying designs are never easy, especially with power. So how did these three companies tackle simplifying power conversion systems?

July 02, 2021 by Antonio Anzaldua Jr.

As EVs Heat Up, Can Thermal Management Systems Cool Them Down?

Managing heat in EVs is no simple task. With materials research and heat-resistant power electronics, however, thermal management systems are slowly advancing EV adoption.

March 24, 2021 by Nicholas St. John

Since Three-Phase Motors Mean Triple the Components, TI Banks on Integration

Texas Instruments claims its highly-integrated BLDC motor driver can reduce PCB area by as much as 30%—a possible catalyst for speeding mild-hybrid EV adoption.

February 22, 2021 by Jake Hertz

Nexperia Creates a New FET Category: the Application-Specific FET (ASFET)

FETs and MOSFETs don't always cut it for dynamic applications. Nexperia says it has created a new flavor of FETs designed to rise to the challenge.

October 26, 2020 by Antonio Anzaldua Jr.

A New Programmable IC Opens Doors for Customizing Motor Drive Applications

What happens when you combine both configurable logic and configurable analog with high-voltage outputs?

June 15, 2020 by Gary Elinoff

The Hall-Effect Sensor and the Rise of Electric Power-Assisted Steering

What can Melexis' new hall-effect sensor teach us about non-contact torque sensors and electric power-assisted steering in general?

April 20, 2020 by Dr. Steve Arar

New Motor-Driver ICs Beg the Question, What On Earth Are FREDFETs?

The new BridgeSwitch motor drivers from Power Integrations stand out for several reasons, like its package and system monitoring. But what do we make of their fundamental label as "FREDFETs?"

March 16, 2020 by Robert Keim

Germany-based Manufacturer Seeks to Innovate Low-power IoT with New Driver IC

The TMC7300 can deliver two amps to drive either one or two DC motors, relays, and LEDs.

January 13, 2020 by Gary Elinoff

Infineon’s Evaluation Board Built to Anticipate SiC in Motor Drives

The EVAL-M5-E1B1245N-SiC supports the design of industrial drive motor applications of up to 7.5 kW.

November 07, 2019 by Gary Elinoff

ST and Mikroe Collaborate on “Click Boards” for STSPIN Motor Driver ICs in Embedded Systems

The newly announced Click board series extends the reach of ST's STSPIN motor driver ICs into the Mikroe ecosystem.

October 14, 2019 by Gary Elinoff

Trinamic Introduces the TMC5160 SilentStepStick for Silent Stepper Motor Operation

The TMC5160 SilentStepStick is a tiny breakout board that can drive motors up to 3A phase current at 35V.

April 11, 2019 by Gary Elinoff

Trinamic Introduces High-Power Gate Driver for BLDC and PMSM Motor Control Solutions

The TMC6200 integrates in-line current sensing for complete Field Oriented Control solutions for servo motors.

April 10, 2019 by Gary Elinoff

New STMicro BLDC Controller Takes a Highly Integrated Approach to Motor Control

Take a closer look at the STSPIN32F0B SiP from STMicroelectronics.

March 14, 2019 by Robert Keim

An EV Made to Demo Motion Control: Monolithic Power Systems’ mCar Shows Off Angular Sensors

The Monolithic Power Systems mCar EV demo at electronica 2018 showed off angle position sensors and motion control.

November 19, 2018 by Kate Smith

Power Integrations Introduces New Family of Brushless DC Motor Drive ICs

Power Integrations’ BridgeSwitch™ family of ICs achieve conversion efficiency of up to 98.5% in brushless DC (BLDC) motor drive applications of up to 300 W.

November 16, 2018 by Gary Elinoff

A New Motor Driver for Three-Phase Battery-Operated Motors from STMicroelectronics

STMicroelectronics announces a new low-voltage three-phase and “three-sense” motor driver IC.

March 19, 2018 by Nick Davis

STMicro’s Newest Stepper Motor Driver: A 256-Microstep Driver with Integrated Control Logic

STMicroelectronics offers their new microstepping motor driver that includes control logic and a power stage.

December 29, 2017 by Nick Davis