Latest Motors News

Categories

Polyn Debuts Power-saving AI Chip for Vibration-monitoring Sensors

A new neuromorphic chip hopes to enable low-power predictive maintenance applications.

April 24, 2023 by Jake Hertz

Women in STEM—A Road Paved With the Firsts of Many Determined Women

As more women find their way into STEM-related fields, they have these women to thank for helping lay the foundation for future generations.

March 30, 2023 by Kimber Wymore

Sensor ICs Suit Up to Play in EVs, RFIDs, and the IoT

New sensor innovations have emerged to play in market-specific zones. Among these are IS0-26262 electric vehicle (EV) sensors, RFID sensors, and sensors geared for the Internet of Things (IoT).

July 01, 2022 by Antonio Anzaldua Jr.

TI Lowers the Acoustics with BLDC Motor Drivers Leveraging Two Control Schemes

Distracted by the noise caused by the many appliances in your home? TI’s newest BLDC motor drivers claim to quiet appliances by up to 3.3 dBA using trapezoidal and field-oriented control.

September 08, 2021 by Adrian Gibbons

GaN Transistors for a Dollar? GaN Overcomes One Major Setback

The price of gallium nitride (GaN) transistors has dropped to less than $1.00 USD, becoming a cost-effective option for manufacturers. Could this lower cost finally push silicon from its throne?

August 16, 2021 by Antonio Anzaldua Jr.

Axial-flux Designs Rev Up the Future of Electric Motors

While electric motors have primarily hinged on radial motor technology over the past 50 years, axial-flux designs are now surging ahead.

August 11, 2021 by Antonio Anzaldua Jr.

Ousting 1900s-era Tech? Solid-state Circuit Breakers Extract DC from AC without Magnetics

Extracting DC from AC without any magnetics at all? A new solid-state circuit breaker put forth by Amber Solutions in partnership with Infineon Technologies stands to cause some pretty intense waves by displacing the nearly century-old technology upon which our electrical infrastructure is built.

July 06, 2021 by Kate Smith

Learning From the Past: EV High Power Density Trends

With EVs being a hot topic recently, what trending designs were used in the past could be learned from? Oak Ridge National Laboratory aims to do just that through its benchmarking project.

May 20, 2021 by Dr. Steve Arar

Will EEs Be the Heroes of the Global Ventilator Shortage?

The COVID-19 pandemic has sounded alarm bells on ventilator shortages. EEs are putting their heads together with open-source ventilator projects to help.

March 30, 2020 by Dr. Steve Arar

Ways to Control the Velocity of Servo Motors: ICs, MCUs, and Even Arduino

What methods of servo control can make life easier for designers?

March 18, 2020 by Gary Elinoff

Toshiba Announces the Latest Generation of Its SOI Process for RF Switch ICs

Toshiba announced last month that it had developed the latest generation of its advanced RF SOI process, TaRF11, optimized for RF switches and low noise amplifiers in mobile devices such as 5G smartphones.

March 11, 2020 by Luke James

Nexperia’s Latest MOSFET Targets Load-switch and Hot-swap Applications

This article examines the PSMNR51-25YLH and discusses MOSFET drain-source leakage current.

February 18, 2020 by Robert Keim

Understanding DC Motor Operation Modes and Speed Regulation Techniques

DC motors are ubiquitous machines found in a variety of electronic equipment used in various applications.

February 04, 2020 by Ikimi .O

SiTime Releases MEMS Temperature-Compensated Oscillators for 5G in Harsh Environments

5G continues to dominate 2019, this time with the wide release of MEMS oscillators for 5G in harsh conditions.

May 16, 2019 by Gary Elinoff

Microchip Technology Introduces Tiny, Low-Power MEMS Clock Generator to Save Board Space

Microchip Technology Introduces a Tiny, Versatile Clock Generator to Save Board Space and Power

November 27, 2018 by Gary Elinoff

Low-Noise, Wide-Bandwidth: A Single Axis Analog Accelerometer from Analog Devices

The ADXL1005 by Analog Devices is a low noise, wide bandwidth, single-axis MEMS accelerometer with Analog Output.

June 08, 2018 by Mark Hughes

A New High-Performance MEMS Relative Humidity and Temperature Sensor from IDT

IDT’s new high-performance MEMS relative humidity and temperature sensor requires no user calibration and comes in four different accuracy levels.

January 24, 2018 by Nick Davis

High Voltage Design: A New Three-Phase Half Bridge Gate Driver from Diodes Inc.

Diodes Incorporated has announced a new three-phase half bridge gate driver with multiple protection features and the ability to drive N-Channel MOSFETs and IGBTs.

December 06, 2017 by Nick Davis

Teardown Tuesday: Mini Air Compressor by Suaoki

In this teardown, we unscrew screws and disconnect plastic pieces to reveal the magical innards of this mini air compressor.

September 26, 2017 by Nick Davis