The dual N-channel devices offer DS breakdown voltages of 40 V and 60 V and current ratings of 25 A to 48 A.
one month ago by Gary Elinoff
This MCU series is ultra-low-power with features for capacitive touch sensing applications.
one month ago by Mouser Electronics
The wired Fieldbus connectivity standard is getting a foothold in the IoT world by facilitating smart building solutions for lighting, HVAC, access control, and fire safety.
one month ago by Majeed Ahmad
A researcher has tested two competing IoT technologies, MYTHINGS and LoRa, against each other to see which one is more reliable. How did they do?
one month ago by Robin Mitchell
In this article, Western Digital's Ted Marena explores the reasons companies have and the process they go through when integrating the open process instruction set architecture RISC-V.
one month ago by Ted Marena, Western Digital
A new chapter begins for miniaturized gas sensors equipped with ASIC-based hardware and configurable software capable of rapidly adopting new sensing platforms.
Add Bluetooth 5 connectivity to any application with these modules.
The new SiLabs units aim at the PLCs, relay drivers, and servo motor controllers employed in industrial automation.
These are designed for rapidly developing low-power and secure portable devices.
Composed of 35 billion transistors, the VU19P is the newest member of the 16 nm Virtex UltraScale+ family.
This driver delivers lighting effects for smart-home devices, wearables, and small appliances.
About 2 months ago by Mouser Electronics
This module is made for advanced wearables, IoT devices, and other applications with Bluetooth 5.
These five-channel current-source DACs provide high-compliance current source outputs.
These SoCs deliver precise Bluetooth position finding for real-time location systems.
2 months ago by Mouser Electronics
This week, Renesas released a new IoT development kit, the RX65N Wi-Fi Connectivity Cloud Kit. What can this kit do and how can it help develop the latest IoT products?
2 months ago by Robin Mitchell
These include a 50-ohm feed point impedance rating and require minimum or no matching circuitry.
The recent hacker cavalcade was a chance for security matters to take center stage, both for those defending the integrity of electronics and those challenging it.
2 months ago by Gary Elinoff
The AP3917 family of switchers meets the needs of systems demanding low power on a steady or intermittent basis.
This week is the 14th annual Flash Memory Summit, a conference focused on memory.
What's new with battery management systems (BMS) for electric vehicles?
Don't have an AAC account? Create one now.
Forgot your password? Click here.
