Latest LEDs Articles and Videos

Categories

Tiny MicroLED Display from Mojo Vision Features Highest-Yet Pixel Density—But for What Applications?

A new display from Mojo Vision is just 0.48mm across, smaller than a grain of sand. What, exactly, is it for?

June 08, 2019 by Gary Elinoff

Diodes Incorporated Announces Versatile New Boost Controller for LED/LCD Display Applications

Diodes Incorporated's new LED controller uses PWM to analog dimming conversion for display applications.

May 04, 2019 by Gary Elinoff

Designing a System Monitor 4-MUX LCD Driver Solution

This application note describes a simple hardware implementation of a 4-Mux LCD driver using time division multiplexing techniques along with system monitoring using a GreenPAK IC.

April 18, 2019 by Krupa Bhavsar, Dialog Semiconductor

How to Interface a 16×2 LCD Module with an MCU

This article will discuss the details of interfacing a 16x2 LCD module with an MCU.

March 04, 2019 by Steve Arar

New Current-Mode Controller from STMicro Brings High Power Factor to LED Lighting

STMicroelectronics claims this new power controller improves efficiency and performance in LED applications.

February 22, 2019 by Robert Keim

Sensors Behind Device Screens, Expression Tracking, and a New SDK: Facial Recognition Roundup

A look at some facial recognition-related info from around the industry.

January 18, 2019 by Kate Smith

Electrical Symbols for Electronic Components: Passive Components

This two-article series provides an overview of circuit symbols, along with some information on the components that they represent.

October 31, 2018 by Robert Keim

AR/VR Display Technology Roundup: OLEDs, GaN-on-Silicon, and Foveated Rendering

Here’s a snapshot of where our display technology is at right now—and a little bit of what is just around the corner.

September 13, 2018 by Chantelle Dubois

Beyond the Optocoupler: Understanding Digital Isolators

Optocouplers are undoubtedly effective, but alternative isolation technologies may be a better choice for your application.

July 13, 2018 by Robert Keim

Hardware Assessment: LightCrafter Evaluation Kit for BeagleBoard Black from Texas Instruments

The Texas Instruments DLPDLCR2000EVM is a demonstration cape designed to plug into a BeagleBone Black (BBB) and provide instant-on projection capabilities using a digital micromirror device and a relatively high-power RGB LED.

July 09, 2018 by Mark Hughes

Teardown Tuesday: Vehicle Code Reader and OBD-II Scanner

In this teardown, we take apart Ancel's vehicle code reader and check engine light scan tool, the AD410, to see if we can find anything interesting.

January 16, 2018 by Nick Davis

Dev Kits from TDK, Add-On Sensor Systems from Bosch Set the Tone for Sensor Incorporation in 2018

Sensor integration unsurprisingly continues to be important for the future of device design. Bosch and TDK showed this month that they're answering the call with both dev kits for easy prototyping and production-ready sensor solutions.

January 15, 2018 by Mark Hughes

Light Sensors: The Absorption Spectrometer, LIDAR, and Thermal Cameras on Display at CES 2018

The 2018 Consumer Electronics Show debuted a variety of sensors. This article looks at LIDAR, microspectrometers, and Infrared cameras.

January 13, 2018 by Mark Hughes

The MIT-i Color Blender! RGB LED Color Blending

Blending colors may sound elementary but it is vital in drawing attention to your project with RGB LEDs!

November 08, 2017 by Ryan Jones

How to Interface an Ultrasonic Sensor with an LCD Using a Microcontroller Dev Kit

Let's interface an ultrasonic sensor and a lighting system! In this project, we'll design a sensor subsystem and then use it in a parking sensor application.

November 02, 2017 by Nick Davis

Teardown Tuesday: Motion-Activated Trail Camera

In this Teardown Tuesday, we are going to take a look at the inner workings of a trail camera!

October 17, 2017 by Alex Udanis

How to Build a Weighing Scale Using a Load Cell and a Microcontroller

In this project, we're making a weighing scale using a C8051 microcontroller development kit, a load cell, and the Simplicity Studio IDE. The measured weight will be displayed on an LCD screen.

October 10, 2017 by Nick Davis

Teardown Tuesday: Digital Kitchen Scale with LCD

In this Teardown Tuesday, we are going to take a look at the inner workings of a small scale that is designed to track calories.

October 10, 2017 by Alex Udanis

Teardown Tuesday: Mini Air Compressor by Suaoki

In this teardown, we unscrew screws and disconnect plastic pieces to reveal the magical innards of this mini air compressor.

September 26, 2017 by Nick Davis

Adding an LCD and Keypad to a Tachometer and Speedometer

In part two of the tachometer/speedometer project, we'll add a keypad and LCD for easier user interaction.

September 18, 2017 by Nick Davis