All About Circuits

Latest Power Supplies Articles and Videos

Categories

How to Select the Right Aluminum Electrolytic Capacitor

How to Select the Right Aluminum Electrolytic Capacitor

Learn the characteristics of aluminum electrolytic capacitors and tips on how to properly select one for use in electrical designs.


What Is Brown Out Reset in Microcontrollers? How to Prevent False Power-Downs

What Is Brown Out Reset in Microcontrollers? How to Prevent False Power-Downs

Brown Out Reset is an important function to increase the reliability of a microcontroller after start-up. Normally used to solve problems with the power supply, this article shows how Brown Out Reset can prevent another problem.


MIT Researchers Introduce a Battery-Free, Underwater Sensor

MIT Researchers Introduce a Battery-Free, Underwater Sensor

Energy harvesting is something that many engineers have heard of but MIT has taken this concept to a whole new level with an underwater sensor that has no battery.


News Aug 21, 2019 by Robin Mitchell
Diodes Incorporated Announces New Low-Power Buck Converters for Small Appliances

Diodes Incorporated Announces New Low-Power Buck Converters for Small Appliances

The AP3917 family of switchers meets the needs of systems demanding low power on a steady or intermittent basis.


News Aug 17, 2019 by Gary Elinoff
High-Voltage Converter from STMicroelectronics Incorporates 1050 V MOSFET

High-Voltage Converter from STMicroelectronics Incorporates 1050 V MOSFET

For when low power has to be efficiently sourced from a high voltage line.


News Aug 01, 2019 by Gary Elinoff
Power Integrations Releases 95%-Efficient, GaN-Based InnoSwitch3 Range of ICs

Power Integrations Releases 95%-Efficient, GaN-Based InnoSwitch3 Range of ICs

This week, Power Integrations has released their latest family of flyback switcher ICs that integrate GaN technology for more efficient power applications.


News Jul 27, 2019 by Robin Mitchell
Why Raspberry Pi Isn’t a Good Choice for Commercial Products

Why Raspberry Pi Isn’t a Good Choice for Commercial Products

RPi has done some amazing good in the world, especially for aspiring young engineers, but here's the breakdown on why it's probably not what you need for a professional project.


Low-Noise Voltage References: Understanding the Noise Performance of a Voltage Reference IC

Low-Noise Voltage References: Understanding the Noise Performance of a Voltage Reference IC

Working with a low noise voltage reference? Learn more about noise specifications and relevant voltage reference ICs.


Utilizing DC-DC Converters in Space-Critical Power System Applications

Utilizing DC-DC Converters in Space-Critical Power System Applications

Power system designers are constantly under pressure because they are tasked with developing highly adaptive solutions that comply with today’s operating environments without interrupting design-to-manufacture cycles.


Enhancing Battery-Powered End Nodes Through Better  Power Supply Design

Enhancing Battery-Powered End Nodes Through Better Power Supply Design

Novel approaches to end node power supply design using switched-mode converters can enable a wireless end node to operate from a CR2032 lithium coin cell with up to +20 dBm transmit power.


How to Troubleshoot a DC-DC Buck Converter

How to Troubleshoot a DC-DC Buck Converter

This article addresses troubleshooting a staple of electronic systems that don’t always work as planned: switch-mode, low-voltage, DC-DC, single-phase, non-isolated, basic buck converter circuits.


UPS in Critical Data Centers

UPS in Critical Data Centers

Data center applications require reliable power sources. Learn more about uninterruptible power supplies in data centers.


Power Supply Units and the IEC 60601-1 Standard: A New Power Control Assembly from COSEL

Power Supply Units and the IEC 60601-1 Standard: A New Power Control Assembly from COSEL

What is IEC 60601-1 and how does it relate to medical power supply units?


News Jun 14, 2019 by Gary Elinoff
Miller Frequency Compensation: How to Use Miller Capacitance for Op-Amp Compensation

Miller Frequency Compensation: How to Use Miller Capacitance for Op-Amp Compensation

Miller capacitance is commonly used in a method for operational amplifier frequency compensation.


Will Energy Harvesting Be What Fuels the Growth of the IoT?

Will Energy Harvesting Be What Fuels the Growth of the IoT?

This article explores the challenge of constantly powering the billions of devices that make up the IoT and how energy harvesting could be an effective solution.


An Introduction to Transient Voltage Suppressors (TVS)

An Introduction to Transient Voltage Suppressors (TVS)

An intro to transients and the devices used to suppress them. Learn about the variety of devices used to suppress transients.


Microchip Lays Out Vision for Power Over Ethernet in Building Automation with New Eight-Port Switch

Microchip Lays Out Vision for Power Over Ethernet in Building Automation with New Eight-Port Switch

What's a digital ceiling, anyway? Microchip announces new PoE switch for Ethernet building automation design.


News May 23, 2019 by Gary Elinoff
Finding a Solution to Extend the Run-Time of a DSLR/DSLM Camera Design

Finding a Solution to Extend the Run-Time of a DSLR/DSLM Camera Design

This article presents the challenges of powering a digital camera and proposes a new design approach to save power while being more flexible.


What Is a Low Pass Filter? A Tutorial on the Basics of Passive RC Filters

What Is a Low Pass Filter? A Tutorial on the Basics of Passive RC Filters

What is filtering? Learn what resistor-capacitor (RC) low-pass filters are and where you can use them.


How to Simulate a Bidirectional Voltage-Controlled Current Source

How to Simulate a Bidirectional Voltage-Controlled Current Source

Learn about simulating an interesting current source built around an op-amp and an instrumentation amplifier.