Manufacturing still takes a large portion of time in the electrical engineering cycle. This article discusses how software-driven automation and the IIoT can help hasten the manufacturing process.
December 17, 2019 by Shashank Samala, Tempo Automation
Novel approaches to end node power supply design using switched-mode converters can enable a wireless end node to operate from a CR2032 lithium coin cell with up to +20 dBm transmit power.
June 25, 2019 by Josh Norem, Silicon Labs
SoCs with programmable logic are an essential element of real-time embedded vision systems. Designers can capitalize on the power and efficiency of Xilinx's Zynq Ultrascale+ MPSoC devices to implement their designs using Avnet's Embedded Vision Kits and the Xilinx reVISION stack.
May 18, 2018 by Xilinx
Connected industrial machines can sense a wide array of information used to make key decisions within the Industrial Internet of Things (IIoT). A sensor within an edge node can be spatially far removed from any data aggregation point. It must connect through a gateway that links edge data with a network.
January 09, 2018 by Ian Beavers, Analog Devices
Designing for the IoT comes with a unique set of challenges that require unique hardware solutions to overcome. Learn how smart passive sensors (SPSs)—sensors that function without a battery and without a microcontroller—are an example of IoT-specific design.
December 05, 2017 by ON Semiconductor
The next step of wide-area wireless connection is to bring the power of wireless to machine type communications (MTC). This will drive a revolution in services that will span sectors as diverse as manufacturing, city management, transportation, and energy.
October 17, 2017 by Emmanuel Gresset, CEVA
There is a trend beginning for a whole new network of smart devices to listen and respond to requests for all rooms of your smart home so you don't have to hear "I'm sorry, I didn't get that" anymore.
October 10, 2017 by Morgan Lollar, Texas Instruments
In this multipart industrial IoT series, we will break down and explore the fundamental aspects of the edge node interpretation within the larger IoT framework: sensing, measuring, interpreting, and connecting data, with additional consideration for power management and security.
September 26, 2017 by Ian Beavers, Analog Devices
The industrial Internet of Things (IoT) encompasses the broad transformation underway that will make pervasive sensing across connected machines not just a competitive advantage, but an essential fundamental service. The industrial IoT starts with the edge node, which is the sensing and measurement entry point of interest.
September 12, 2017 by Ian Beavers, Analog Devices
This article discusses how the use of three key design methods utilized in optocouplers improves galvanic isolation performance and presents an accompanying high voltage surge test as proof.
3 days ago by Lim Shiun Pi, Broadcom Inc
Manufacturing still takes a large portion of time in the electrical engineering cycle. This article discusses how software-driven automation and the IIoT can help hasten the manufacturing process.
December 17, 2019 by Shashank Samala, Tempo Automation
This article introduces Severe Environment Testing (SET), a safety testing standard that bridges the gap between a full MIL-STD product and a COTS product to provide additional confidence in the safety of a COTS product.
November 19, 2019 by Brian Niehoff, Samtec
This article describes a methodology that automates set up, constraints, and results analysis as designs move from static CDC analysis to formal verification to simulation and avoid manual scripting efforts, thus reducing setup effort and errors.
November 14, 2019 by Kurt Takara, Mentor
This article looks at the differences between crystal resonators and oscillators and presents examples that show when choosing crystals over oscillators could increase the total cost of a design.
November 05, 2019 by Bruce Potvin, SiTime
This article looks at the safety standard that governs ADAS features and the challenge in designing power monitoring systems to comply with this standard while introducing an automotive power monitor that has been certified to meet this standard.
September 06, 2019 by Michael Jackson, Maxim Integrated
Power system designers are constantly under pressure because they are tasked with developing highly adaptive solutions that comply with today’s operating environments without interrupting design-to-manufacture cycles.
June 28, 2019 by MINMAX
Novel approaches to end node power supply design using switched-mode converters can enable a wireless end node to operate from a CR2032 lithium coin cell with up to +20 dBm transmit power.
June 25, 2019 by Josh Norem, Silicon Labs
