With the adoption of artificial intelligence and machine learning in a wide variety of applications, reliability verification of AI/ML processors is critical since failures can have major consequences for the validity and legitimacy of AI/ML technology.
January 21, 2020 by Neel Natekar, Mentor
This article describes a methodology that automates set up, constraints, and results analysis as designs move from static CDC analysis to formal verification to simulation and avoid manual scripting efforts, thus reducing setup effort and errors.
November 14, 2019 by Kurt Takara, Mentor
This article looks at the safety standard that governs ADAS features and the challenge in designing power monitoring systems to comply with this standard while introducing an automotive power monitor that has been certified to meet this standard.
September 06, 2019 by Michael Jackson, Maxim Integrated
This application note describes an SLG46140V design that implements a 16-bit up/down counter with quadrature encoder inputs. The GreenPAK device relieves the host of real-time input requirements and allows for easy connection of multiple encoders.
April 30, 2019 by Muhammad Shahbaz, for Dialog Semiconductor
This design solution evaluates the accuracy of thermocouples used for high-temperature measurements as well as resistance temperature detectors (RTDs) used for local cold-junction-compensation (CJC) points.
April 11, 2019 by Bonnie Baker, Maxim Integrated
This article explores how RISC-V, combined with open-source collaboration and standards, is enabling innovation and purpose-built technologies among software engineers, system architects, CTOs, and board designers. It also touches on the possible impact that RISC-V and open source trends could have on the future of data-centric application experiences.
March 20, 2019 by Ted Marena, Western Digital
This article shows how to implement an analog PID controller, including adjusting of the angular position of a DC motor shaft, editing the design to control its speed, and tuning PID parameters for reliable performance.
August 14, 2018 by Mahmoud Hamdy, Brightskies Technologies
Intermediate Bus Architecture is an emerging method that power designers are using to conserve PCB space. This article discusses the solution benefits and tradeoffs of adopting this technique, and how it may be scaled to address application-specific requirements.
18 hours ago by Tamara Lin, Intel
This article aims to simplify the DC power connector selection process with an overview of types, key specifications, and commonly accepted nomenclature, while also looking at audio and USB connectors in power applications.
June 23, 2020 by Ryan Smoot, CUI Devices
Semiconductor manufacturing is a complex industry and small improvements anywhere in the process can make a big difference to the bottom line. This article discusses the benefits of continually optimizing manufacturing for the semiconductor industry by introducing smart manufacturing solutions.
May 19, 2020 by Tim Hewitt, Siemens Digital Industries Software
In this article, Octopart's Director of Operations for Part Data Geof Lipman explores how traditional CAD modeling needs to change in order for electrical engineers to keep up with product design deadlines.
March 10, 2020 by Geof Lipman, Octopart