One effective solution to the requirements of 5G technology is the use of HLC (High-layer Count) PCB boards that integrate key features such as skip vias, POVF manufacturing, advanced raw materials, and impedance control.
November 11, 2021 by Sarah Kuang, Kinwong
In this second installment of the "Protect Your Ports! Top Design Tips to Keep Your Communications Connected" series, we explore what protecting high-speed interfaces looks like, including USB, HDMI, DisplayPort, and eSATA.
June 29, 2021 by Todd Phillips, Littelfuse
Leveraging board-level cameras offer a variety of benefits. To help identify the right mix of features and design elements, here are some factors to consider when selecting and designing in an embedded machine vision camera.
February 11, 2021 by Brian Cha, FLIR
This article explores using PSpice for TI to simulate potential causes for parasitic effects in a motor-drive design and offers design tips to mitigate the negative effects common with high-power motor-drive systems.
February 04, 2021 by Matt Hein, Texas Instruments
Redriver or retimer devices can extend the Peripheral Component Interface Express (PCIe®) protocol signal range. This article discusses how to select the best one for compute system and NVMe™ storage applications today and into the future.
January 12, 2021 by Tam Do, Microchip
Designers must consider processing temperatures, producibility, and solder joint integrity of every component as well as higher I/O connectors. This article looks at ways to enable smaller component footprints for high-density PCBs.
November 03, 2020 by Brian Niehoff, Samtec
In this article, learn how to enable I2C by allowing the LPC55S69 MCU on the E1 board to communicate with a Bosch BME280 environmental sensor present on the Microe Weather click module.
September 10, 2020 by Mark Dunnett, on Behalf of NXP
MCAD and ECAD have inserted themselves into most design engineers' day-to-day work. Although familiar, both programs have come a long way and are continuing to evolve. In this article, learn the past and future of these design tools.
August 27, 2020 by Sam Sattel, Autodesk
Intel Enpirion PowerSoC modules are DC-DC step-down converters that integrate nearly all the components needed to build a power supply without sacrificing performance or efficiency. These solutions are designed to meet strict FPGA, ASIC, and processor power requirements.
August 25, 2020 by Tamara Lin, Intel
The OKdo E1 development board is only as wide as a coin but contains the LPC55S69 microcontroller, making it suitable for a variety of small production runs and prototypes. Here, get more familiar with the dev board and see how to use its evaluation kit.
August 20, 2020 by Mark Dunnett, on Behalf of NXP
The FixturFab DEV260 development fixture allows designers to debug or configure PCBAs during the development phase. See how it works in this example using the Sparkfun Power Delivery Board.
August 04, 2020 by Duncan Lowder, FixturFab
Intermediate Bus Architecture is an emerging method that power designers are using to conserve PCB space. This article discusses the solution benefits and tradeoffs of adopting this technique, and how it may be scaled to address application-specific requirements.
July 07, 2020 by Tamara Lin, Intel
This article aims to simplify the DC power connector selection process with an overview of types, key specifications, and commonly accepted nomenclature, while also looking at audio and USB connectors in power applications.
June 23, 2020 by Ryan Smoot, CUI Devices