Latest Sensors Industry Articles

Categories

Points to Consider When Selecting an NTC Thermistor

This article explores NTC thermistor types and their critical performance criteria and provides advice on selecting the appropriate device for a given application.

October 13, 2020 by Krystian Milewski , TDK

How to Obtain the Temperature Value from a Thermistor Measurement

This article explains how to use an NTC or a PTC thermistor with an ADC, along with the various process techniques to convert ADC measured results into a usable temperature value.

August 18, 2020 by Gordon Varney, Texas Instruments

Time-of-Flight Sensors for In-Cabin Vehicle Safety

This article looks at how time-of-flight sensing in a vehicle's cabin can improve safety and convenience.

August 21, 2019 by Gualtiero Bagnuoli, Melexis

Will Energy Harvesting Be What Fuels the Growth of the IoT?

This article explores the challenge of constantly powering the billions of devices that make up the IoT and how energy harvesting could be an effective solution.

May 28, 2019 by Robert Huntley, Mouser

Improving Temperature Sensor Accuracy for Thermocouples and RTDs with Delta-Sigma Converters

This design solution evaluates the accuracy of thermocouples used for high-temperature measurements as well as resistance temperature detectors (RTDs) used for local cold-junction-compensation (CJC) points.

April 11, 2019 by Bonnie Baker, Maxim Integrated

Designing Smart Meters with Circuit Protection, Sensing, and Power Control Capabilities

This article offers an overview of the various component options for smart meter design and how they can improve the operation of the meters into which they are designed.

December 04, 2018 by Philippe Di Fulvio, Littelfuse Inc

How to Set Up ROHM’s Arduino Sensor Shield for IoT | AAC How-To

This video demonstrates how to set up and use ROHM's sensor evaluation kit for IoT for prototyping and testing new IoT devices.

October 03, 2018 by ROHM Semiconductor

3-Phase Brushless DC Motor Control with Hall Sensors

This article describes how to control a 3-phase brushless DC motor using a GreenPAK.

June 26, 2018 by Oleg Basovych, Dialog Semiconductor

Resolving the Signal Part 6: The Effects of Amplifier Noise on Delta-Sigma ADCs

Part 6 of this 12-part Resolving the Signal series focuses on output- versus input-referred noise, adding an amplifier at the input of an ADC, and low- versus high-resolution ADCs as they relate to amplifier noise.

June 19, 2018 by Bryan Lizon, Texas Instruments

Capturing 3D Images with Time-of-Flight Camera Technology

Time-of-flight (ToF) is a relatively new method by which it is possible to gather detailed 3D information. This article looks at ToF cameras and their applications.

May 15, 2018 by Mark Patrick, Mouser

How to Design Low-Cost Contactless Position Sensors

In this video, we’ll demonstrate an inductive sensing technique used for contactless position sensing.

March 05, 2018 by Chris Anderson

Intelligence at the Edge Part 3: Edge Node Communication

Connected industrial machines can sense a wide array of information used to make key decisions within the Industrial Internet of Things (IIoT). A sensor within an edge node can be spatially far removed from any data aggregation point. It must connect through a gateway that links edge data with a network.

January 09, 2018 by Ian Beavers, Analog Devices

Choosing the Most Suitable MEMS Accelerometer for Your Application: Part 2

In part 2 of this article, we will focus on key specifications and features in the context of wearable devices, condition monitoring, and IoT applications.

December 22, 2017 by Chris Murphy, Analog Devices

Choosing the Most Suitable MEMS Accelerometer for Your Application: Part 1

Part 1 of this two-part series discusses the key parameters and features a designer needs to be aware of and how they relate to inclination and stabilization applications, thus helping the designer choose the most suitable accelerometer.

December 12, 2017 by Chris Murphy, Analog Devices

Designing for the IoT: Microcontroller-Free Smart-Passive-Sensors​ ​(SPS)​

Designing for the IoT comes with a unique set of challenges that require unique hardware solutions to overcome. Learn how smart passive sensors (SPSs)—sensors that function without a battery and without a microcontroller—are an example of IoT-specific design.

December 05, 2017 by ON Semiconductor

High Definition, Low Delay, SDR-Based Video Transmission in UAV Applications

Integrated RF agile transceivers are not only widely employed in software-defined radio (SDR) architectures in cellular telephone base stations, such as multiservice distributed access system (MDAS) and small cell, but also for wireless HD video transmission for industrial, commercial, and military applications, such as unmanned aerial vehicles (UAVs).

November 07, 2017 by Wei Zhou, Analog Devices

Using a Silego GreenPAK to Build a Temperature Sensing System

In this project, we'll test how the Silego GreenPAK can be used to build a temperature-sensing system.

October 11, 2017 by Tijana Uzelac, Silego Technologies

Intelligence at the Edge Part 2: Reduced Time to Insight

In this multipart industrial IoT series, we will break down and explore the fundamental aspects of the edge node interpretation within the larger IoT framework: sensing, measuring, interpreting, and connecting data, with additional consideration for power management and security.

September 26, 2017 by Ian Beavers, Analog Devices

How to Train Your Door Lock

This article takes a look at how current- or next-generation technologies can provide the potential for innovative applications and the problems and solutions that may arise.

September 22, 2017 by Stefan Schauer, Texas Instruments

Intelligence at the Edge Part 1: The Edge Node

The industrial Internet of Things (IoT) encompasses the broad transformation underway that will make pervasive sensing across connected machines not just a competitive advantage, but an essential fundamental service. The industrial IoT starts with the edge node, which is the sensing and measurement entry point of interest.

September 12, 2017 by Ian Beavers, Analog Devices