In today's data-driven world, devices are constantly striving to connect with one another, especially in the automotive industry. How can vehicle-to-everything (V2V) communication change the world of vehicle communication?
December 23, 2021 by Dan Loop, NXP Semiconductors
This article provides an introduction to microcontroller power management concepts. The NXP i.MX RT500 family of crossover MCUs will be used to provide examples of how these power management concepts can be employed by embedded developers in their applications.
July 08, 2021 by Alejandra Guzman, NXP Semiconductors
Learn about multi-threaded programs, developing applications using the XOS real-time operating system, resource sharing with semaphores, and how NXP's i.MX RT500 family of microcontrollers help engineers design DSP-enabled smart devices.
June 24, 2021 by Jason Tseng, NXP Semiconductors
This article discusses the use of an encoder to ensure accurate ongoing tracking of a motor's rotor shaft and the key factors that will help in the selection of the encoder based on different parameters.
March 16, 2021 by Jason Kelly, CUI Devices
Learn about the widely used methods for filtering and processing data samples in the time domain while taking a closer look at the Dual Biquad IIR engine of the PowerQuad unit in the LPC55S69 MCU.
December 03, 2020 by Eli Hughes, NXP Semiconductors
This article looks at semiconductor technologies that are driving EV chargers, including high-voltage semiconductor switches, power converters, and multi-level complex power stages.
October 06, 2020 by Jayanth Rangaraju, Texas Instruments
This article looks at digit detection and recognition using MNIST eIQ as an example, which consists of several parts — the digit recognition is performed by a TensorFlow Lite model, and a GUI is used to increase the usability of the i.MX RT1060 device.
September 22, 2020 by David Piskula, NXP Semiconductors
In this article, we discuss some key security threats to be aware of when designing for the IoT, important security functions, and how protecting these designs is becoming easier with advances in security ICs.
September 15, 2020 by Scott Jones, Maxim Integrated
Intel Enpirion PowerSoC modules are DC-DC step-down converters that integrate nearly all the components needed to build a power supply without sacrificing performance or efficiency. These solutions are designed to meet strict FPGA, ASIC, and processor power requirements.
August 25, 2020 by Tamara Lin, Intel
Autonomous drones and robots utilize small motors. These fast-spinning mini motors require miniature encoders and IC package sizes. This article shows how an optical sinusoidal encoder provides a higher resolution and increased speeds with a 2x3 mm dual simultaneous-sampling SAR-ADC.
August 11, 2020 by Bonnie Baker, Maxim Integrated
Explore the LPC55S16, an MCU well-suited for industrial and professional applications, thanks to its fast clock speed of 150 MHz, out-of-the-box support for communicating over a CAN-FD bus network, and low current consumption.
August 06, 2020 by Mark Dunnett, on Behalf of NXP