With the adoption of artificial intelligence and machine learning in a wide variety of applications, reliability verification of AI/ML processors is critical since failures can have major consequences for the validity and legitimacy of AI/ML technology.
January 21, 2020 by Neel Natekar, Mentor
This article looks at the safety standard that governs ADAS features and the challenge in designing power monitoring systems to comply with this standard while introducing an automotive power monitor that has been certified to meet this standard.
September 06, 2019 by Michael Jackson, Maxim Integrated
3GPP Release 16 holds the promise to make high precision location services cheaper and more reliable. Exploiting new signal properties in combination with a variety of non-cellular technologies could enable forms of hybrid positioning.
April 02, 2019 by Sylvia Lu, u-blox
This article shows how to implement an analog PID controller, including adjusting of the angular position of a DC motor shaft, editing the design to control its speed, and tuning PID parameters for reliable performance.
August 14, 2018 by Mahmoud Hamdy, Brightskies Technologies
This article looks at a solution to add additional USB charging ports to a vehicle using a single chip containing all the necessary parts and delivers 5V to the device.
July 10, 2018 by Nazzareno Rossetti, Maxim Integrated
Quad flat no-lead and discrete (or dual) flat no-lead packages provide a welcome increase in component density on a PCB area by eliminating leads. However, the solder connection quality cannot be tested by automated optical inspection. This article explores solutions to this often costly problem.
May 31, 2018 by Hans-Jürgen Funke, Nexperia
SoCs with programmable logic are an essential element of real-time embedded vision systems. Designers can capitalize on the power and efficiency of Xilinx's Zynq Ultrascale+ MPSoC devices to implement their designs using Avnet's Embedded Vision Kits and the Xilinx reVISION stack.
May 18, 2018 by Xilinx
Looking at the electrification of the powertrain, this article explores why 48-volt architecture makes sense and then takes a look at some of the different mounting options for 48-volt starter generators.
April 24, 2018 by Ivan Petrov, Nexperia
Intermediate Bus Architecture is an emerging method that power designers are using to conserve PCB space. This article discusses the solution benefits and tradeoffs of adopting this technique, and how it may be scaled to address application-specific requirements.
About 21 hours ago by Tamara Lin, Intel
This article aims to simplify the DC power connector selection process with an overview of types, key specifications, and commonly accepted nomenclature, while also looking at audio and USB connectors in power applications.
June 23, 2020 by Ryan Smoot, CUI Devices
Semiconductor manufacturing is a complex industry and small improvements anywhere in the process can make a big difference to the bottom line. This article discusses the benefits of continually optimizing manufacturing for the semiconductor industry by introducing smart manufacturing solutions.
May 19, 2020 by Tim Hewitt, Siemens Digital Industries Software
In this article, Octopart's Director of Operations for Part Data Geof Lipman explores how traditional CAD modeling needs to change in order for electrical engineers to keep up with product design deadlines.
March 10, 2020 by Geof Lipman, Octopart