OT (operational technology) and IT (informational technology) may have different real-time needs, but they're merged in the TSN (time-sensitive networking) Ethernet-based standards. Learn about the theory and hardware involved in implementing TSN in industrial network design.
August 12, 2021 by Christian Castel, NXP
This article discusses the use of an encoder to ensure accurate ongoing tracking of a motor's rotor shaft and the key factors that will help in the selection of the encoder based on different parameters.
March 16, 2021 by Jason Kelly, CUI Devices
This article provides an overview of access control topology in smart homes and industrial buildings by covering the various protection and sensing solutions engineers can use in their designs.
November 17, 2020 by Ryan Sheahen, Littelfuse
NXP’s i.MX 8M Plus applications processor enables machine learning and intelligent vision for consumer applications and the industrial edge. Learn about the features of this processor and how it can be used in embedded vision systems.
October 22, 2020 by Jeff Steinheider, NXP Semiconductors
Explore the LPC55S16, an MCU well-suited for industrial and professional applications, thanks to its fast clock speed of 150 MHz, out-of-the-box support for communicating over a CAN-FD bus network, and low current consumption.
August 06, 2020 by Mark Dunnett, on Behalf of NXP
As automotive moves from domain to zonal networks, many different kinds of data end up sharing the same wires. This article looks at IEEE 802.1’s Time-Sensitive Networking (TSN) standards as a solution.
July 21, 2020 by Don Pannell, NXP Semiconductors
Manufacturing still takes a large portion of time in the electrical engineering cycle. This article discusses how software-driven automation and the IIoT can help hasten the manufacturing process.
December 17, 2019 by Shashank Samala, Tempo Automation
3GPP Release 16 holds the promise to make high precision location services cheaper and more reliable. Exploiting new signal properties in combination with a variety of non-cellular technologies could enable forms of hybrid positioning.
April 02, 2019 by Sylvia Lu, u-blox
This article offers an overview of the various component options for smart meter design and how they can improve the operation of the meters into which they are designed.
December 04, 2018 by Philippe Di Fulvio, Littelfuse Inc
This article shows how to implement an analog PID controller, including adjusting of the angular position of a DC motor shaft, editing the design to control its speed, and tuning PID parameters for reliable performance.
August 14, 2018 by Mahmoud Hamdy, Brightskies Technologies
This article looks at a solution to add additional USB charging ports to a vehicle using a single chip containing all the necessary parts and delivers 5V to the device.
July 10, 2018 by Nazzareno Rossetti, Maxim Integrated
This article outlines traditional half-duplex RS-485 configurations and then presents new alternatives for simplifying the control interface by eliminating the required control lines and software control code.
May 29, 2018 by Bonnie Baker, Maxim Integrated
SoCs with programmable logic are an essential element of real-time embedded vision systems. Designers can capitalize on the power and efficiency of Xilinx's Zynq Ultrascale+ MPSoC devices to implement their designs using Avnet's Embedded Vision Kits and the Xilinx reVISION stack.
May 18, 2018 by Xilinx