This article discusses the use of an encoder to ensure accurate ongoing tracking of a motor's rotor shaft and the key factors that will help in the selection of the encoder based on different parameters.
March 16, 2021 by Jason Kelly, CUI Devices
This article explores components that protect and control their circuits in smart home security applications, specifically components for protecting wired and wireless security cameras and wired doorbell cameras.
December 22, 2020 by Ryan Sheahen, Littelfuse
This article discusses an algorithm to find the optimum adjusted point in a two-dimensional space with orthogonal input vectors. The algorithm solves equations for intersecting circles based on measured data points.
December 15, 2020 by Russell Hoppenstein, Texas Instruments
In this article, we discuss some key security threats to be aware of when designing for the IoT, important security functions, and how protecting these designs is becoming easier with advances in security ICs.
September 15, 2020 by Scott Jones, Maxim Integrated
This article discusses how the use of three key design methods utilized in optocouplers improves galvanic isolation performance and presents an accompanying high voltage surge test as proof.
January 14, 2020 by Lim Shiun Pi, Broadcom Inc
This application note describes an SLG46140V design that implements a 16-bit up/down counter with quadrature encoder inputs. The GreenPAK device relieves the host of real-time input requirements and allows for easy connection of multiple encoders.
April 30, 2019 by Muhammad Shahbaz, for Dialog Semiconductor
3GPP Release 16 holds the promise to make high precision location services cheaper and more reliable. Exploiting new signal properties in combination with a variety of non-cellular technologies could enable forms of hybrid positioning.
April 02, 2019 by Sylvia Lu, u-blox
This app note implements a binary parity generator and checker with two data input variants, a parallel data input, and a serial data input. It describes the implemented logic, GreenPAKs implementation, and the obtained results.
June 12, 2018 by Dialog Semiconductor
This article outlines traditional half-duplex RS-485 configurations and then presents new alternatives for simplifying the control interface by eliminating the required control lines and software control code.
May 29, 2018 by Bonnie Baker, Maxim Integrated
Connected industrial machines can sense a wide array of information used to make key decisions within the Industrial Internet of Things (IIoT). A sensor within an edge node can be spatially far removed from any data aggregation point. It must connect through a gateway that links edge data with a network.
January 09, 2018 by Ian Beavers, Analog Devices
This article describes the state of the semiconductor technology that is enabling new developments with shorter gate length GaAs and GaN transistors, circuit design considerations to achieve optimum performance, and examples of both GaAs and GaN wideband power amplifiers (PAs) that demonstrate today’s technology.
November 14, 2017 by Keith Benson, Analog Devices
Integrated RF agile transceivers are not only widely employed in software-defined radio (SDR) architectures in cellular telephone base stations, such as multiservice distributed access system (MDAS) and small cell, but also for wireless HD video transmission for industrial, commercial, and military applications, such as unmanned aerial vehicles (UAVs).
November 07, 2017 by Wei Zhou, Analog Devices