In today's data-driven world, devices are constantly striving to connect with one another, especially in the automotive industry. How can vehicle-to-everything (V2V) communication change the world of vehicle communication?
December 23, 2021 by Dan Loop, NXP Semiconductors
One effective solution to the requirements of 5G technology is the use of HLC (High-layer Count) PCB boards that integrate key features such as skip vias, POVF manufacturing, advanced raw materials, and impedance control.
November 11, 2021 by Sarah Kuang, Kinwong
3GPP Release 16 holds the promise to make high precision location services cheaper and more reliable. Exploiting new signal properties in combination with a variety of non-cellular technologies could enable forms of hybrid positioning.
April 02, 2019 by Sylvia Lu, u-blox
This article looks at a solution to add additional USB charging ports to a vehicle using a single chip containing all the necessary parts and delivers 5V to the device.
July 10, 2018 by Nazzareno Rossetti, Maxim Integrated
Part 5 of this 12-part series continues to explore effective noise bandwidth as it relates to delta-sigma ADCs and system-level design by stepping through a simple example using a two-stage filter to understand how to calculate the ENBW and how system changes affect the ENBW.
May 22, 2018 by Bryan Lizon, Texas Instruments
Part 4 of this “Resolving the Signal” article series covers noise in delta-sigma ADCs focuses on understanding basic effective noise bandwidth (ENBW) topics.
April 11, 2018 by Bryan Lizon, Texas Instruments
Connected industrial machines can sense a wide array of information used to make key decisions within the Industrial Internet of Things (IIoT). A sensor within an edge node can be spatially far removed from any data aggregation point. It must connect through a gateway that links edge data with a network.
January 09, 2018 by Ian Beavers, Analog Devices
This article describes the state of the semiconductor technology that is enabling new developments with shorter gate length GaAs and GaN transistors, circuit design considerations to achieve optimum performance, and examples of both GaAs and GaN wideband power amplifiers (PAs) that demonstrate today’s technology.
November 14, 2017 by Keith Benson, Analog Devices
The next step of wide-area wireless connection is to bring the power of wireless to machine type communications (MTC). This will drive a revolution in services that will span sectors as diverse as manufacturing, city management, transportation, and energy.
October 17, 2017 by Emmanuel Gresset, CEVA
Digital power supplies are widely employed in high-end servers, storage, telecom brick modules, and more. For these applications, isolation is often required. This article discusses the digital isolation techniques with Analog Devices’ iCoupler products in digital power supply design.
August 01, 2017 by Jason Duan, Analog Devices
Development is well underway on Gigabit LTE cellular communications systems that promise an order of magnitude increase in data transfer rates and 5G is close behind. Small cell access nodes will form an essential part of both systems but new communications processors are needed to make these a reality.
June 08, 2017 by Emmanuel Gresset, CEVA
Passive intermodulation represents the intermodulation products generated when two or more signals transit through a passive device with nonlinear properties. The interaction of mechanical components generally causes nonlinear elements.
May 09, 2017 by Frank Kearney, Analog Devices
