Designing PCBs and enclosures in parallel is the best way to ensure high-quality system designs. Learn how to use Fusion 360 to marry the 2D domain of PCB design with the 3D domain of mechanical enclosure design.
November 03, 2022 by Edwin Robledo, Fusion 360 Electronics
Learn some of the high-level basics of magnetic integrated connector modules (ICMs), some of the tasks they are used to accomplish, and look at an example product from Bel Fuse.
October 06, 2022 by Jeff Kring, Bel Magnetic Solutions & TRP Connector
In this Industry Article, we'll discuss PoE (Power over Ethernet) standards and power sourcing equipment (PSE), using office Internet of Things (IoT) devices as an example application.
November 16, 2021 by Rich Fry, TDK Corporation of America
In this second installment of the "Protect Your Ports! Top Design Tips to Keep Your Communications Connected" series, we explore what protecting high-speed interfaces looks like, including USB, HDMI, DisplayPort, and eSATA.
June 29, 2021 by Todd Phillips, Littelfuse
Redriver or retimer devices can extend the Peripheral Component Interface Express (PCIe®) protocol signal range. This article discusses how to select the best one for compute system and NVMe™ storage applications today and into the future.
January 12, 2021 by Tam Do, Microchip
This article explores components that protect and control their circuits in smart home security applications, specifically components for protecting wired and wireless security cameras and wired doorbell cameras.
December 22, 2020 by Ryan Sheahen, Littelfuse
Designers must consider processing temperatures, producibility, and solder joint integrity of every component as well as higher I/O connectors. This article looks at ways to enable smaller component footprints for high-density PCBs.
November 03, 2020 by Brian Niehoff, Samtec
This article aims to simplify the DC power connector selection process with an overview of types, key specifications, and commonly accepted nomenclature, while also looking at audio and USB connectors in power applications.
June 23, 2020 by Ryan Smoot, CUI Devices
This article looks at a solution to add additional USB charging ports to a vehicle using a single chip containing all the necessary parts and delivers 5V to the device.
July 10, 2018 by Nazzareno Rossetti, Maxim Integrated