Latest Test & Measurement Industry Articles

Understanding these artifacts allows designers to successfully integrate switching regulators in a wider range of…

Understanding these artifacts allows designers to successfully integrate switching regulators in a wider range of high-performance, noise-sensitive applications.

USB Type-C: the final frontier. These are the trials and tribulations of navigating this new cable.

USB Type-C: the final frontier. These are the trials and tribulations of navigating this new cable.

Learn about noise behaviors in MEMS gyroscopes.

Learn about noise behaviors in MEMS gyroscopes.

Learn how e-paper displays work and how to integrate low power e-paper displays into your embedded projects.

Learn how e-paper displays work and how to integrate low power e-paper displays into your embedded projects.

This video shows the R&S RTO-K26 MIPI D-PHY compliance test options which provides automated testing to the MIPI D-PHY…

This video shows the R&S RTO-K26 MIPI D-PHY compliance test options which provides automated testing to the MIPI D-PHY standard for camera and display interfaces.

This video demonstrates how the R&S RTO-K40 option can be used to measure response times of front end components such as…

This video demonstrates how the R&S RTO-K40 option can be used to measure response times of front end components such as power amplifiers (PA) and switches controlled by the MIPI RFFE control interface.

Internet of Things (IoT) devices combine multiple functional cores in highly integrated Wireless Embedded designs and…

Internet of Things (IoT) devices combine multiple functional cores in highly integrated Wireless Embedded designs and face often challenging long-term battery live time requirement.

Zone Triggering typically allows to define a trigger condition based on an area of voltage and time.

Zone Triggering typically allows to define a trigger condition based on an area of voltage and time.

This video shows how the R&S RTO oscilloscope with its vector signal explorer (VSE) software can be used to analyze wide…

This video shows how the R&S RTO oscilloscope with its vector signal explorer (VSE) software can be used to analyze wide band pulsed RF signals in terms of frequency, phase, amplitude, and timing.

Measuring small currents has become increasingly important for battery powered portable and wearable consumer devices,…

Measuring small currents has become increasingly important for battery powered portable and wearable consumer devices, IoT and medical applications.

Embedded multi-media cards (eMMC) are widely used in the industry as the primary memory for portable devices.

Embedded multi-media cards (eMMC) are widely used in the industry as the primary memory for portable devices.

Conducted emissions are electromagnetic disturbances caused by a device and conducted out by interconnects such as the…

Conducted emissions are electromagnetic disturbances caused by a device and conducted out by interconnects such as the power supply lines.

Meeting EMI and EMC requirements is critical to bringing electronic products to market. Compliance testing requires…

Meeting EMI and EMC requirements is critical to bringing electronic products to market. Compliance testing requires expensive equipment and test time at a compliance laboratory.

Today’s highly integrated electronic devices use smaller voltage levels and, as a result, require much smaller ripple…

Today’s highly integrated electronic devices use smaller voltage levels and, as a result, require much smaller ripple levels on the power rails for reliable operation.

SpaceWire is a new serial bus standard for aircraft and areospace applications that supports bit rate up to 400 Mbps. The…

SpaceWire is a new serial bus standard for aircraft and areospace applications that supports bit rate up to 400 Mbps. The R&S option K65, SpaceWire trigger & decode, for RTE and RTO offers triggering and decoding of SpaceWire protocol communication.