All About Circuits

Latest Automotive Industry Articles

Categories

Meeting ASIL Compliance for ADAS with an Integrated SoC Power System Monitor

Meeting ASIL Compliance for ADAS with an Integrated SoC Power System Monitor

This article looks at the safety standard that governs ADAS features and the challenge in designing power monitoring systems to comply with this standard while introducing an automotive power monitor that has been certified to meet this standard.


Time-of-Flight Sensors for In-Cabin Vehicle Safety

Time-of-Flight Sensors for In-Cabin Vehicle Safety

This article looks at how time-of-flight sensing in a vehicle's cabin can improve safety and convenience.


How Will 5G Networks Improve Location Awareness?

How Will 5G Networks Improve Location Awareness?

3GPP Release 16 holds the promise to make high precision location services cheaper and more reliable. Exploiting new signal properties in combination with a variety of non-cellular technologies could enable forms of hybrid positioning.


Measure Position and Speed Control of a DC Motor Using an Analog PID Controller

Measure Position and Speed Control of a DC Motor Using an Analog PID Controller

This article shows how to implement an analog PID controller, including adjusting of the angular position of a DC motor shaft, editing the design to control its speed, and tuning PID parameters for reliable performance.


Design Solution: Using a Small Amount of Space to Add More USB Ports to a Vehicle

Design Solution: Using a Small Amount of Space to Add More USB Ports to a Vehicle

This article looks at a solution to add additional USB charging ports to a vehicle using a single chip containing all the necessary parts and delivers 5V to the device.


Side-Wettable Flanks Enable AOI on Leadless SMD (DFN) Packages

Side-Wettable Flanks Enable AOI on Leadless SMD (DFN) Packages

Quad flat no-lead and discrete (or dual) flat no-lead packages provide a welcome increase in component density on a PCB area by eliminating leads. However, the solder connection quality cannot be tested by automated optical inspection. This article explores solutions to this often costly problem.


Accelerating Embedded Vision Integration with Xilinx SoCs and the reVISION Stack

Accelerating Embedded Vision Integration with Xilinx SoCs and the reVISION Stack

SoCs with programmable logic are an essential element of real-time embedded vision systems. Designers can capitalize on the power and efficiency of Xilinx's Zynq Ultrascale+ MPSoC devices to implement their designs using Avnet's Embedded Vision Kits and the Xilinx reVISION stack.


Capturing 3D Images with Time-of-Flight Camera Technology

Capturing 3D Images with Time-of-Flight Camera Technology

Time-of-flight (ToF) is a relatively new method by which it is possible to gather detailed 3D information. This article looks at ToF cameras and their applications.


The 48-Volt Starter Generator for Electric Vehicle Architectures

The 48-Volt Starter Generator for Electric Vehicle Architectures

Looking at the electrification of the powertrain, this article explores why 48-volt architecture makes sense and then takes a look at some of the different mounting options for 48-volt starter generators.


The Appearance of the 48-Volt Mild Hybrid Vehicle

The Appearance of the 48-Volt Mild Hybrid Vehicle

This article explores how MHEVs differ from a traditional ICE vehicle, touching on the electrification of the powertrain by digging into some of the key differences in terms of architecture.


How to Design Low-Cost Contactless Position Sensors

How to Design Low-Cost Contactless Position Sensors

In this video, we’ll demonstrate an inductive sensing technique used for contactless position sensing.


How to Run From a Coin Cell for 10 Years

How to Run From a Coin Cell for 10 Years

Check out this buck converter that is designed to extend battery life from months to years in IoT applications, like sensor nodes and beacons.


Who Is Driving Autonomous Cars Anyway?

Who Is Driving Autonomous Cars Anyway?

In this Industry Article, Mark Forbes of Altium explores the problems, solutions, and safety standards surrounding autonomous vehicles.


Choosing the Most Suitable MEMS Accelerometer for Your Application: Part 1

Choosing the Most Suitable MEMS Accelerometer for Your Application: Part 1

Part 1 of this two-part series discusses the key parameters and features a designer needs to be aware of and how they relate to inclination and stabilization applications, thus helping the designer choose the most suitable accelerometer.


How To Protect Against Catastrophic Shorts in EVs

How To Protect Against Catastrophic Shorts in EVs

In this video, we’re going to talk about protecting against catastrophic shorts, why some fuses explode, and why that’s bad.


Installing a Tire Pressure Monitoring System

Installing a Tire Pressure Monitoring System

Tire pressure monitoring systems are a necessary safety feature in cars. This project looks at the different system types and how a TPMS can be retrofitted on older cars.


3 Applications That Should Emphasize Protection and Filtering Solutions

3 Applications That Should Emphasize Protection and Filtering Solutions

Protection and filtering solutions aren’t a new concept, but as systems gain more connectivity in smaller packages, they are more important than ever.


The Ethical Minefield for Autonomous Vehicles

The Ethical Minefield for Autonomous Vehicles

As autonomous vehicle technology progresses, public acceptance lags behind.


Autonomous Vehicle News: Buses Navigate Tunnels, Self-Driving Taxis, and Liability Laws

Autonomous Vehicle News: Buses Navigate Tunnels, Self-Driving Taxis, and Liability Laws

Innovations, setbacks, and legislation for autonomous vehicles happen so fast that it can be hard to keep up with. Here are some stories that caught our eye.


Developing Smarter, Safer Cars with ADAS (Automotive Advanced Driver Assistance Systems) IP

Developing Smarter, Safer Cars with ADAS (Automotive Advanced Driver Assistance Systems) IP

Optimizing performance, safety, and reliability in ADAS applications via design, verification, and processor IP and a holistic design approach.