Latest Wearables Articles and Videos

TI’s HDC2010 is a highly accurate, 14-bit, low power temperature and humidity sensor in a compact WLCSP package.

TI’s HDC2010 is a highly accurate, 14-bit, low power temperature and humidity sensor in a compact WLCSP package.

Panasonic’s MC Series eMMC storage media use high-reliability MLC NAND and a controller that supports enhanced ECC and…

Panasonic’s MC Series eMMC storage media use high-reliability MLC NAND and a controller that supports enhanced ECC and wear leveling for reliable storage in critical applications.

STMicroelectronics showcases their new ultra-compact piezoresistive pressure sensor which functions as a digital barometer.

STMicroelectronics showcases their new ultra-compact piezoresistive pressure sensor which functions as a digital barometer.

This News Brief takes a look at the STM32L4+ with advanced graphics capabilities from STMicroelectronics.

This News Brief takes a look at the STM32L4+ with advanced graphics capabilities from STMicroelectronics.

A look at the MAX16140—a tiny device that uses a tiny amount of current, but one that promises a lot.

A look at the MAX16140—a tiny device that uses a tiny amount of current, but one that promises a lot.

Could this be the chip that brings contactless payment in wearables to the forefront? This News Brief takes a look at the…

Could this be the chip that brings contactless payment in wearables to the forefront? This News Brief takes a look at the ST53G SiP (system-in-package) from STMicroelectronics.

TI’s TMP116 is a low-power, high-accuracy digital temperature sensor that consumes less power and is easier to use than RTDs.

TI’s TMP116 is a low-power, high-accuracy digital temperature sensor that consumes less power and is easier to use than RTDs.

Bosch Sensortec’s BME680 combines gas, air pressure, humidity, and ambient temperature sensing into a small, low-cost,…

Bosch Sensortec’s BME680 combines gas, air pressure, humidity, and ambient temperature sensing into a small, low-cost, and low power package for IoT, mobile, and wearable devices.

The newest addition to the franchise, Star Trek Discovery, will be airing this month. In anticipation, here are a few…

The newest addition to the franchise, Star Trek Discovery, will be airing this month. In anticipation, here are a few Star Trek technologies and how they compare to today’s available tech.

Taiyo Yuden’s EYSHSNZWZ Bluetooth Low Energy module is a tiny Bluetooth 5 ready module that integrates the crystal and…

Taiyo Yuden’s EYSHSNZWZ Bluetooth Low Energy module is a tiny Bluetooth 5 ready module that integrates the crystal and antenna so developers without RF expertise can integrate BLE into space-constrained applications, including wearables and smart accessories.

NXP’s NTAG I2C Plus Explorer Kit is a platform for demonstration and development using NXP’s NTAG I2C plus second…

NXP’s NTAG I2C Plus Explorer Kit is a platform for demonstration and development using NXP’s NTAG I2C plus second generation connected NFC tags.

A team of engineers from University of California San Diego have created a biofuel cell that produces ten times the power…

A team of engineers from University of California San Diego have created a biofuel cell that produces ten times the power of its predecessors

Employees and experts question the overall safety of RFID chips in human workers.

Employees and experts question the overall safety of RFID chips in human workers.

Two new PMICs boost integration with single inductor multiple output (SIMO) regulator to maintain a very long battery life.

Two new PMICs boost integration with single inductor multiple output (SIMO) regulator to maintain a very long battery life.

Researchers from the University of California Berkeley have created a wearable device worn on the ear that can monitor…

Researchers from the University of California Berkeley have created a wearable device worn on the ear that can monitor core body temperature in real time.

In part 4 of our Wi-Fi Eye project, we'll deal with our power supply

In part 4 of our Wi-Fi Eye project, we'll deal with our power supply

Part 3 of this project focuses on choosing and configuring the servos you will use to create your Wi-Fi Eye.

Part 3 of this project focuses on choosing and configuring the servos you will use to create your Wi-Fi Eye.

Building an animatronic, wearable, Wi-Fi robots, part 1: Programming the controller.

Building an animatronic, wearable, Wi-Fi robots, part 1: Programming the controller.

Leap Motion, a hand tracking company, has just raised $50 million funding for its continued development of its hand…

Leap Motion, a hand tracking company, has just raised $50 million funding for its continued development of its hand tracking system.