This design solution evaluates the accuracy of thermocouples used for high-temperature measurements as well as resistance temperature detectors (RTDs) used for local cold-junction-compensation (CJC) points.
April 11, 2019 by Bonnie Baker, Maxim Integrated
When working with high-precision sensors, it's crucial to consider housing. In this article, we discuss an approach to designing a custom board holder for an inclinometer subsystem.
January 15, 2019 by Mark Hughes
So you have a schematic. How do you lay out your custom board? In this article, we'll go over the challenges and solutions I came across in designing a custom PCB for an inclinometer subsystem.
January 11, 2019 by Mark Hughes
For most, the name "Father Christmas" conjures images of toys and gadgets. But for this gentleman maker, the name brings misery. Be sure to stockpile your Arduino, Raspberry Pi, and Particle Photons; it's time to catch Saint Nick red-handed.
December 21, 2018 by Robin Mitchell
This article describes a methodology that automates set up, constraints, and results analysis as designs move from static CDC analysis to formal verification to simulation and avoid manual scripting efforts, thus reducing setup effort and errors.
one day ago by Kurt Takara, Mentor
This article looks at the differences between crystal resonators and oscillators and presents examples that show when choosing crystals over oscillators could increase the total cost of a design.
November 05, 2019 by Bruce Potvin, SiTime
In this article, we’ll first look at the basics of representing a digital image. Then, we’ll discuss some simple operations that allow us to adjust the brightness and contrast of an image. Finally, we’ll briefly look at the circuit implementation of these operations.
October 31, 2019 by Steve Arar
